Shallow Cavity General Purpose Clipper Oil Seal Wiper (H) | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Diámetro del eje (pulg)

Diámetro interior (pulg)

Anchura (pulg)

Temperatura mínima de servicio (F)

Temperatura máxima de servicio (F)

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
Shallow Cavity General Purpose Clipper Oil Seal Wiper (H)

Shallow Cavity General Purpose Clipper Oil Seal Wiper (H)

Parker's H wiper is a shallow cavity general purpose Clipper® oil seal wiper used for excluding contaminants in reciprocating and rotary applications.

Especificaciones técnicas

  • Materiales de fabricación: Various Rubber
  • Opciones de material de polímero: Nitrile Butadiene Rubber (NBR, XNBR), Fluorocarbon Rubber (FKM, FPM)
  • Velocidad de corte máxima: 1000 to 2000 (5.1 to 10.2 m/s) ft/min, 5.1 to 10.2 m/sec
  • Tamaño: 3/8 to 30 inch
  • Desviación del eje máxima: n/a
  • Desalineación máxima del eje con el diámetro: 0.008"
  • Presión de trabajo máxima: 0 psi
  • Tipo de junta: Composite rubber/aramid fiber heel
  • Material de junta del eje: Rubber

Descripción completa del producto

AVAILABILITY: Due to the customized nature of this product, only a sampling of Parker's part numbers are shown. If the materials and dimensions you need are not shown, assistance with part number configuration may be found in the literature document in the Product Support tab.

Parker’s H Wiper is a shallow cavity general purpose rod wiper designed to exclude dust and contamination in moderate speed rotary and low speed reciprocating applications. Clipper® wipers feature a non-metallic composite OD for damage free installation. Its materials of construction – a dense outer case and soft, flexible lip – are concentrically molded as a single unit. The seal’s non-metallic, composite rubber/aramid fiber OD, or “heel,” forms a leak-free, press fit in the housing, conforming to minor surface irregularities.

Product features include:
• Shallow cavity design
• General purpose, springless rod wiper for excluding dust and contamination
• Used in high speed reciprocating and rotary applications.

Standard Materials:
H1L5, Neoprene/Aramid fiber heel with NBR lip: Temp -20F / +250F
H1L7, Neoprene/Aramid fiber heel with lo-temp NBR lip NBR: Temp -30F / +250F
H5L16, FKM/Aramid fiber heel with FKM lip: Temp -40F / +400F

Shaft Surface Speed: Up to 300 fpm reciprocating (1.5 m/s), 2000 fpm rotary (10.2 m/s)

Size Range: 3/8 to 30 inches; (9.5 to 762 mm)

Maximum (STBM) Misalignment: 0.008” (0.20 mm)

Maximum Pressure: 0 psi

Typical Applications: Moderate speed rotary and low speed reciprocating applications.

Note: May require a bore plate for reciprocating.

Documentos relacionados

×
Productos Diámetro del eje (pulg) Diámetro interior (pulg) Anchura (pulg) Temperatura mínima de servicio (F) Temperatura máxima de servicio (F)
16204 H1L7 0.750 1.250 0.250 -30 250
13366 H1L5 1.000 1.375 0.188 -20 250
13366 H1L7 1.000 1.375 0.188 -30 250
13366 H5L16 1.000 1.375 0.188 -30 400
16205 H1L7 1.000 1.500 0.250 -30 250
16206 H1L7 1.125 1.750 0.313 -30 250
10893 H1L7 1.250 1.688 0.250 -30 250
16197 H1L7 1.250 1.875 0.313 -30 250
15708 H1L7 1.300 1.875 0.250 -30 250
16207 H1L7 1.375 2.125 0.375 -30 250
17882 H1L7 1.378 1.850 0.236 -30 250
12692 H1L7 1.500 2.000 0.250 -30 250
10572 H1L5 1.500 2.250 0.375 -20 250
10572 H1L7 1.500 2.250 0.375 -30 250
16201 H1L7 1.750 2.750 0.500 -30 250
19063 H1L5 1.875 2.627 0.375 -20 250
19063 H5L16 1.875 2.627 0.375 -40 400
16200 H1L7 2.000 3.000 0.500 -30 250
15177 H1L7 2.250 2.753 0.313 -30 250
16202 H1L5 2.250 3.250 0.500 -20 250
16202 H5L16 2.250 3.250 0.500 -30 400
16203 H1L5 2.500 3.500 0.500 -20 250
16203 H1L7 2.500 3.500 0.500 -30 250
16203 H5L16 2.500 3.500 0.500 -30 400
17603 H1L5 2.750 3.750 0.500 -20 250
17816 H1L5 3.000 4.000 0.500 -20 250
11764 H1L5 3.250 4.250 0.500 -20 250
11764 H1L7 3.250 4.250 0.500 -30 250
11764 H5L16 3.250 4.250 0.500 -30 400
18939 H1L7 3.250 4.250 0.375 -30 250
17323 H1L5 3.500 4.500 0.500 -20 250
17323 H1L7 3.500 4.500 0.500 -30 250
16291 H1L7 3.740 4.213 0.354 -30 250
11336 H1L7 4.000 5.000 0.516 -30 250
11336 H5L16 4.000 5.000 0.516 -30 400
17063 H1L5 4.250 5.250 0.500 -20 250
12826 H1L7 4.500 5.250 0.375 -30 250
12502 H1L7 4.500 5.500 0.500 -30 250
12825 H1L7 5.000 5.750 0.375 -30 250
12031 H1L5 5.000 6.000 0.500 -20 250
12031 H1L7 5.000 6.000 0.500 -30 250
14446 H1L7 5.250 6.500 0.625 -30 250
12819 H1L7 5.500 6.250 0.375 -30 250
13105 H1L7 5.906 6.875 0.500 -30 250
13091 H1L5 6.695 7.750 0.500 -20 250
12350 H1L7 8.250 9.250 0.500 -30 250
17112 H1L7 9.500 10.500 0.500 -30 250
16040 H1L7 15.750 17.250 0.750 -30 250
15649 H1L7 17.000 18.500 0.750 -30 250
17964 H1L7 24.000 26.000 1.000 -30 250

687852
687567