Pilot Operated, Solenoid Controlled, Directional Control Valve - D101VW Series | Brazil
HVD D101VW Series
318612
false
[
]
Este sitio utiliza cookies para ofrecerle la mejor experiencia posible. Si continúa navegando o si permanece en el sitio, acepta el uso que hagamos de tales cookies de acuerdo con nuestra
Política de privacidad.
. Obtenga más información, incluso cómo gestionar las cookies
aquí.
Este sitio utiliza cookies para ofrecerle la mejor experiencia posible. Si continúa navegando o si permanece en el sitio, acepta el uso que hagamos de tales cookies de acuerdo con nuestraPolítica de privacidad. Obtenga más información, incluso cómo gestionar las cookies aquí.
Buscar
Criterios de búsqueda no válidos
Pilot Operated, Solenoid Controlled, Directional Control Valve - D101VW Series | Product Series
var attrArray = new Array();
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '250 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA 10; CETOP 10, NG32 ';
attrValueMap['Índice de caudal máximo'] = '130 GPM ';
attrArray.push(attrValueMap);
Parker’s D101V directional control valves are 5-chamber, pilot operated, solenoid controlled valves.
Especificaciones técnicas
Temperatura máxima de funcionamiento:
+140 °F
Índice de caudal máximo:
80, 130, 250 gal/min
Temperatura mínima de funcionamiento:
-4 °F
Tipo de accionamiento:
Solenoid
Material del cuerpo:
Grey Iron
Material de la junta:
Nitrile, Fluorocarbon
Tipo de válvula:
Pilot Operated Directional Control Valve
Tamaño:
NFPA 10; CETOP 10, NG32
Tipo de montaje:
Subplate
Presión de trabajo máxima:
3000 psi, 207 bar
Peso:
77.1 lb, 35 kg
Opciones adicionales:
Consult catalog for other available features
Descripción completa del producto
Parker’s D101V directional control valves are available in 2 or 3-position styles. These valves are manifold or subplate mounted, and conform to NFPA’s D10, CETOP 10 mounting pattern.
Markets: • Entertainment Automation • Factory Automation • Lumber & Wood • Machine Tools • Marine • Material Handling • Miscellaneous Industrial • Miscellaneous Manufacturing • Miscellaneous Processing • Molding • Oil & Gas • Other Natural Resources • Packaging Machinery • Plastic Packaging • Power Generation • Primary Metal Refining/Process • Printing and Marking Equipment • Rubber & Tire Processing • Vehicle Assembly Facilities
Features/Benefits: • Explosion proof available • Low pressure drop design • Fast response option available • Hardened spools provide long life • No tools required for coil removal • Wide variety of voltages and electrical connections
Applications: • Suitable for general hydraulic applications