Pilot Operated Directional Control Valve - D81VW Series | Brazil
HVD D81VW Series
318612
false
[
]
Este sitio utiliza cookies para ofrecerle la mejor experiencia posible. Si continúa navegando o si permanece en el sitio, acepta el uso que hagamos de tales cookies de acuerdo con nuestra
Política de privacidad.
. Obtenga más información, incluso cómo gestionar las cookies
aquí.
Este sitio utiliza cookies para ofrecerle la mejor experiencia posible. Si continúa navegando o si permanece en el sitio, acepta el uso que hagamos de tales cookies de acuerdo con nuestraPolítica de privacidad. Obtenga más información, incluso cómo gestionar las cookies aquí.
Buscar
Criterios de búsqueda no válidos
Pilot Operated Directional Control Valve - D81VW Series | Product Series
var attrArray = new Array();
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Presión de trabajo máxima'] = '3000 PSI ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Índice de caudal máximo'] = '80 GPM ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Presión de trabajo máxima'] = '5000 PSI ';
attrValueMap['Tipo de montaje'] = 'Subplate ';
attrValueMap['Tamaño'] = 'NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot ';
attrValueMap['Índice de caudal máximo'] = '160 GPM ';
attrArray.push(attrValueMap);
Parker’s D81VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves.
Especificaciones técnicas
Temperatura máxima de funcionamiento:
+140 °F
Índice de caudal máximo:
80, 160 gal/min
Temperatura mínima de funcionamiento:
-4 °F
Tipo de accionamiento:
Hydraulic Pressure
Material del cuerpo:
Grey Iron
Material de la junta:
Nitrile, Fluorocarbon
Tipo de válvula:
Pilot Operated Directional Control Valve
Tamaño:
NFPA D08, CETOP8, DIN NG25, Low Flow, D03 Pilot
Tipo de montaje:
Subplate
Presión de trabajo máxima:
5000 psi, 345 bar
Peso:
43.2 lb, 19.6 kg
Opciones adicionales:
Consult catalog for other available features
Descripción completa del producto
Parker’s D81VW directional control valves are available in 2 or 3-position. They are manifold or subplate mounted valves which conform to NFPA’s D08, CETOP 8 mounting patterns.
Markets: • Entertainment Automation • Factory Automation • Lumber & Wood • Machine Tools • Marine • Material Handling • Miscellaneous Industrial • Miscellaneous Manufacturing • Miscellaneous Processing • Molding • Oil & Gas • Other Natural Resources • Packaging Machinery • Plastic Packaging • Power Generation • Primary Metal Refining/Process • Printing and Marking Equipment • Rubber & Tire Processing • Vehicle Assembly Facilities
Features/Benefits: • Explosion proof available • Low pressure drop design • Fast response option available • Hardened spools provide long life • No tools required for coil removal • Wide variety of voltages and electrical connections available
Applications: • Suitable for general hydraulic applications