Fusor® 309-1D/309-2D Epoxy Adhesive

Fusor® 309-1D/309-2D adhesive is a high performance, thixotropic, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface.

1 Product

Viewing 10 of 1

Close

LORD® 306-1/306-2 Epoxy Adhesive

LORD® 306-1/306-2 epoxy adhesive system is used for applications that require gap filling or non-sag characteristics on a vertical surface. Conforms to military specification MIL-A-24456 for bonding plastic vibration damping tiles to steel.

2 Products

Viewing 10 of 2

Close

LORD® 309-1D GB/309-2D Epoxy Adhesive

LORD® 309-1D GB/309-2D epoxy adhesive system is for applications requiring gap filling or non-sag characteristics on vertical surface. Provides excellent adhesion to prepared metals & rubber, FRP, & wood. Glass beads allow control of bondline thickness.

1 Product

Viewing 10 of 1

Close

LORD® 310-A/310-B Epoxy Adhesive

LORD® 310-A/310-B adhesive system is used to bond many types of prepared metals, prepared rubber, urethane and plastics. Also used to bond disk drives, down-hole oil field equipment, automotive body panels and spoilers, and vibration damping mounts.

2 Products

Viewing 10 of 2

Close

LORD® 3170-A/3170-B Epoxy Adhesive

LORD® 3170-A/3170-B adhesive is an equal-mix, epoxy structural adhesive system used to bond metals, glass, reinforced plastics, ceramics and foam materials for cryogenic applications.

1 Product

Viewing 10 of 1

Close

LORD® 403 Acrylic Adhesive

LORD® 403 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.

4 Products

Viewing 10 of 4

Close

LORD® 406 Acrylic Adhesive

LORD® 406 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.

10 Products

Viewing 10 of 10

Close

LORD® 410 Acrylic Adhesive

LORD® 410 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.

2 Products

Viewing 10 of 2

Close

LORD® 459X Adhesion Enhancer/Surface Modifier

LORD® 459X adhesion enhancer/surface modifier is a primer in xylene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.

3 Products

Viewing 10 of 3

Close

LORD® 7450-A/B Urethane Adhesive

LORD® 7450-A/B urethane adhesive system is designed for applications where the cured material will be exposed to cryogenic temperature environments. It provides a tough elastomeric polymer for use in diverse technologies.

1 Product

Viewing 10 of 1

Close

LORD® 7701 Adhesion Enhancer/Surface Modifier

LORD® 7701 adhesion enhancer/surface modifier is used on various vulcanized and thermoplastic polymeric materials to alter the surface of the rubber, making it more receptive to bonding. It is used in conjunction with a broad range of LORD adhesives.

2 Products

Viewing 10 of 2

Close