Parkers P1G single acting spring return cartridge cylinder in bore sizes Ø6 to Ø16mm with standard temperature -20°C to +80°C has a threaded nickel plated brass body for integral mounting and offers a good level of corrosion resistance. Suited to low force, high cycle and repetitive operations.

Markets:
• Miscellaneous Industrial
• Miscellaneous Manufacturing
• Miscellaneous Processing

Features/Benefits:
• Nickel plated body and stainless steel piston rod for corrosion resistance
• Threaded body to ease installation and adjustment
• Compact design to aid installation
• Can be bulkhead or manifold mounted for flexible mounting

Applications:
• Low force, high cycle and repetitive operations

General Technical Data 
• International standards : N/A
• Bore Sizes : Ø6, Ø10, and Ø16mm
• Stroke Length : 5, 10 and 15mm (standard strokes only)
• Versions:  single acting, spring return
• Cushioning : N/A
• Position Sensing : N/A 
• Installation : threaded body offers integral mounting 
• Mounting Position : any

Operating and Environmental Data 
• Operating Medium : for best possible service life and trouble-free operation dry, filtered compressed air to ISO 8573-1:2010 quality class 3.4.3 should be used. This specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for minus temperature operation and we recommend the use of an inline dryer) and is in line with the air quality from most standard compressors with a standard filter. 
• Operating Pressure : 2 to 7 Bar
• Operating Temperature : -20°C to +80°C (standard  temperature)
• Pre-lubricated : further lubrication is normally not necessary. If additional lubrication is introduced it must be continued. 
• Corrosion Resistance : high resistance to corrosion and chemicals.

Material Specification - Cylinder:
• Cylinder Body : Nickel plated brass
• Piston Rod : Stainless steel
• Piston Rod Nut : Nickel plated brass
• Mounting Nut : Nickel plated brass
• Seals : NBR (Nitrile rubber)
• Return Spring : Stainless steel