Aquacon® AC Series
Remove Water and Dirt from Oils, Fuels and Gases

BENEFITS

- Removes free and emulsified water to less than 2 ppm
- Differential pressure increase alerts operator to change cartridges
- Effectively filters silt and other particulates
- No media migration or “linting”
- Easy to install and remove
- Does not affect oil additives
- Fits standard filter housings

WARNING: Absorbent-type monitor cartridges will not remove water from fuel containing alcohol-blending agents (commonly called gasohol). For removal of solids, please use Velcon particle removal filters specifically made for gasohol. Consult your Velcon representative.

TECHNICAL INFORMATION

- Maximum operating temperature is 250°F.
- Aquacon Cartridges will shut off flow when loaded with water or dirt. Appropriate precautions should be taken in?critical applications where oil flow must be maintained.
- With some lube and hydraulic oils all of the water may not be removed in one pass, and extra passes will be required for total removal.
- Water capacity for the AC-718 cartridges ranges from 2?to 4 quarts.

APPLICATIONS

- Gasoline
- Hydraulic Oil
- Kerosene
- Turbine Lube Oil
- Diesel Fuel
- Quench Oil
- Insulating Oil
- Synthetic Oil
- Biodiesel
- Phosphate Ester Oil

Aquacon® Cartridges have a patented* construction for removing dirt and water from hydrocarbon and other oils as?well as gases. The outer media layer filters out silt, rust?and other particulate contaminants. The inner layers absorb water and chemically bond it so that no water will release downstream.

When the Aquacon Cartridge reaches its water holding limit, the media swells shut and the differential pressure rapidly increases. This signals the operator that the cartridge must be changed.