The maximum number of products that can be compared is 4. Please refine your selection.
Your session is about to timeout due to inactivity. Click OK to extend your time for an additional 0 minutes.
NLA PDE
357633
false
[
]
This item has been successfully added to your list.
To give you the best possible experience, this site uses cookies. By continuing to use the site, or by staying here, you agree to our use of cookies in line with our
Privacy Policy.
Learn more including how to manage cookies
here.
Head seal Prädifa series NLA, FlexiSeal® | Product Series
var attrArray = new Array();
var attrValueMap = {};
attrValueMap['Maximum Working Temperature (C)'] = '80 ';
attrValueMap['Minimum Working Temperature (C)'] = '-200 ';
attrValueMap['Groove Width'] = '2.4 ';
attrValueMap['Seal Material'] = '6 ';
attrValueMap['Inside Diameter (mm)'] = '7,94 ';
attrValueMap['Element Height (mm)'] = '2,4 ';
attrValueMap['Outside Diameter (mm)'] = '10,8 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '8 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '3.6 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '7 ';
attrValueMap['Element Height (mm)'] = '3,6 ';
attrValueMap['Outside Diameter (mm)'] = '12,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Groove Width'] = '2.4 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '1 ';
attrValueMap['Outside Diameter (mm)'] = '27 ';
attrValueMap['Element Height (mm)'] = '2,4 ';
attrValueMap['Inside Diameter (mm)'] = '24,2 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '25 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '1 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Outside Diameter (mm)'] = '34,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '25 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Outside Diameter (mm)'] = '34,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '25 ';
attrValueMap['Maximum Working Temperature (C)'] = '80 ';
attrValueMap['Minimum Working Temperature (C)'] = '-200 ';
attrValueMap['Groove Width'] = '4.8 ';
attrValueMap['Seal Material'] = '6 ';
attrValueMap['Element Height (mm)'] = '4,8 ';
attrValueMap['Outside Diameter (mm)'] = '31,2 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '25,4 ';
attrValueMap['Outside Diameter (mm)'] = '34,9 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '28 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '3.6 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '45 ';
attrValueMap['Element Height (mm)'] = '3,6 ';
attrValueMap['Outside Diameter (mm)'] = '32,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '30 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '4.8 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '11 ';
attrValueMap['Element Height (mm)'] = '4,8 ';
attrValueMap['Outside Diameter (mm)'] = '36,2 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '30 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '4.8 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '4,8 ';
attrValueMap['Outside Diameter (mm)'] = '36,2 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '40 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '30,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '40 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '30,6 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '38,1 ';
attrValueMap['Outside Diameter (mm)'] = '47,6 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '44,5 ';
attrValueMap['Outside Diameter (mm)'] = '53,9 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '59 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '49,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '50,8 ';
attrValueMap['Outside Diameter (mm)'] = '60,3 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '7 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '54,6 ';
attrValueMap['Outside Diameter (mm)'] = '64,1 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '60 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '7 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Outside Diameter (mm)'] = '69,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '60 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '11 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Outside Diameter (mm)'] = '69,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '70 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Inside Diameter (mm)'] = '60,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '70 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '4.8 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '4,8 ';
attrValueMap['Outside Diameter (mm)'] = '76,2 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '80 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '4.8 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '4,8 ';
attrValueMap['Outside Diameter (mm)'] = '86,2 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '98 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Outside Diameter (mm)'] = '107 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '119 ';
attrValueMap['Inside Diameter (mm)'] = '110 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '10 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '123 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '9.5 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '7 ';
attrValueMap['Element Height (mm)'] = '9,5 ';
attrValueMap['Inside Diameter (mm)'] = '111 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '114 ';
attrValueMap['Outside Diameter (mm)'] = '119 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '3.6 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '7 ';
attrValueMap['Element Height (mm)'] = '3,6 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '116 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '9.5 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Outside Diameter (mm)'] = '128 ';
attrValueMap['Seal Material'] = '7 ';
attrValueMap['Element Height (mm)'] = '9,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '140 ';
attrValueMap['Inside Diameter (mm)'] = '128 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '9.5 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '11 ';
attrValueMap['Element Height (mm)'] = '9,5 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Outside Diameter (mm)'] = '138 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '3.6 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '1 ';
attrValueMap['Element Height (mm)'] = '3,6 ';
attrValueMap['Inside Diameter (mm)'] = '133 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '140 ';
attrValueMap['Maximum Working Temperature (C)'] = '80 ';
attrValueMap['Outside Diameter (mm)'] = '149 ';
attrValueMap['Minimum Working Temperature (C)'] = '-200 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Seal Material'] = '6 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '145 ';
attrValueMap['Outside Diameter (mm)'] = '154 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '152 ';
attrValueMap['Outside Diameter (mm)'] = '159 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '4.8 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '1 ';
attrValueMap['Element Height (mm)'] = '4,8 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '165 ';
attrValueMap['Outside Diameter (mm)'] = '174 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrValueMap['Seal Material'] = '5 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Maximum Working Temperature (C)'] = '80 ';
attrValueMap['Minimum Working Temperature (C)'] = '-200 ';
attrValueMap['Groove Width'] = '7.1 ';
attrValueMap['Seal Material'] = '6 ';
attrValueMap['Element Height (mm)'] = '7,1 ';
attrValueMap['Outside Diameter (mm)'] = '213 ';
attrValueMap['Inside Diameter (mm)'] = '203 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Inside Diameter (mm)'] = '27.5 ';
attrValueMap['Seal Material'] = 'Polon 001 ';
attrValueMap['Groove Width'] = '3.6 ';
attrValueMap['Outside Diameter (mm)'] = '32.02 ';
attrValueMap['Element Height (mm)'] = '3.6 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Seal Material'] = 'Polon 001 ';
attrValueMap['Inside Diameter (mm)'] = '102 ';
attrValueMap['Groove Width'] = '3.6 ';
attrValueMap['Element Height (mm)'] = '3.6 ';
attrValueMap['Minimum Working Temperature (C)'] = '-190 ';
attrValueMap['Outside Diameter (mm)'] = '106.52 ';
attrValueMap['Maximum Working Temperature (C)'] = '230 ';
attrArray.push(attrValueMap);
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.....
Click here to view all product safety information.
Full Product Description
The NLA product series is a FlexiSeal® design with a cantilever spring. It is ideally suited for static applications requiring greater flexibility of the seal cross-section (spring travel) due to higher coaxiality fluctuations between the rod and groove or due to excessive expansion and contraction (“breathing”). It is characterized by extremely high temperature and chemical resistance. NLA may also be used for dynamic applications (internal and external).• Symmetric lip design.• Cantilever spring for low load / high compliance behaviour.• Many high-resilience energizer options available, including choice of light, medium and heavy loads and NACE for oil field use.• Available with silicone filling for food and drug applications.• Allows the integration of a stand-off ring to protect the sealing lips in case of reverse pressure.
