var attrArray = new Array(); var attrValueMap = {}; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Inside Diameter (mm)'] = '16 '; attrValueMap['Groove Width'] = '8.5 '; attrValueMap['Maximum Working Temperature (C)'] = '120 '; attrValueMap['Outside Diameter (mm)'] = '100 '; attrValueMap['Element Height (mm)'] = '15.1 '; attrValueMap['Seal Material'] = 'Z5086 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '20 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Groove Width'] = '6.5 '; attrValueMap['Outside Diameter (mm)'] = '100 '; attrValueMap['Element Height (mm)'] = '18 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Outside Diameter (mm)'] = '6 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '2 '; attrValueMap['Groove Width'] = '1.45 '; attrValueMap['Element Height (mm)'] = '3.8 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '3 '; attrValueMap['Groove Width'] = '1.8 '; attrValueMap['Element Height (mm)'] = '5 '; attrValueMap['Outside Diameter (mm)'] = '8 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Outside Diameter (mm)'] = '10 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '3 '; attrValueMap['Groove Width'] = '1.8 '; attrValueMap['Element Height (mm)'] = '5 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '4.5 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Outside Diameter (mm)'] = '12 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Groove Width'] = '2.3 '; attrValueMap['Element Height (mm)'] = '6 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '4.5 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Outside Diameter (mm)'] = '12 '; attrValueMap['Groove Width'] = '2.3 '; attrValueMap['Element Height (mm)'] = '6 '; attrValueMap['Seal Material'] = 'Z5058 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '4.5 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Groove Width'] = '2.3 '; attrValueMap['Element Height (mm)'] = '6.5 '; attrValueMap['Outside Diameter (mm)'] = '16 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Inside Diameter (mm)'] = '4.5 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Groove Width'] = '2.3 '; attrValueMap['Maximum Working Temperature (C)'] = '200 '; attrValueMap['Element Height (mm)'] = '6.5 '; attrValueMap['Outside Diameter (mm)'] = '16 '; attrValueMap['Seal Material'] = 'Z5067 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Groove Width'] = '2.8 '; attrValueMap['Element Height (mm)'] = '7.5 '; attrValueMap['Outside Diameter (mm)'] = '20 '; attrValueMap['Inside Diameter (mm)'] = '6 '; attrValueMap['Maximum Working Temperature (C)'] = '200 '; attrValueMap['Seal Material'] = 'Z5067 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Groove Width'] = '2.8 '; attrValueMap['Element Height (mm)'] = '7.5 '; attrValueMap['Outside Diameter (mm)'] = '20 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '6 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Groove Width'] = '2.8 '; attrValueMap['Element Height (mm)'] = '7.5 '; attrValueMap['Outside Diameter (mm)'] = '20 '; attrValueMap['Inside Diameter (mm)'] = '6 '; attrValueMap['Seal Material'] = 'Z5058 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '7 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Outside Diameter (mm)'] = '25 '; attrValueMap['Groove Width'] = '3.5 '; attrValueMap['Element Height (mm)'] = '8.8 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '7 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Outside Diameter (mm)'] = '25 '; attrValueMap['Groove Width'] = '3.5 '; attrValueMap['Element Height (mm)'] = '8.8 '; attrValueMap['Seal Material'] = 'Z5146 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '7 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Outside Diameter (mm)'] = '25 '; attrValueMap['Groove Width'] = '3.5 '; attrValueMap['Element Height (mm)'] = '8.8 '; attrValueMap['Seal Material'] = 'Z5058 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Inside Diameter (mm)'] = '7 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Outside Diameter (mm)'] = '25 '; attrValueMap['Groove Width'] = '3.5 '; attrValueMap['Maximum Working Temperature (C)'] = '200 '; attrValueMap['Element Height (mm)'] = '8.8 '; attrValueMap['Seal Material'] = 'Z5067 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '8 '; attrValueMap['Outside Diameter (mm)'] = '32 '; attrValueMap['Element Height (mm)'] = '11 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Groove Width'] = '3.5 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Inside Diameter (mm)'] = '8 '; attrValueMap['Outside Diameter (mm)'] = '32 '; attrValueMap['Element Height (mm)'] = '11 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Groove Width'] = '3.5 '; attrValueMap['Maximum Working Temperature (C)'] = '200 '; attrValueMap['Seal Material'] = 'Z5067 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '8 '; attrValueMap['Outside Diameter (mm)'] = '32 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Groove Width'] = '3.5 '; attrValueMap['Element Height (mm)'] = '9.1 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '8 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Outside Diameter (mm)'] = '40 '; attrValueMap['Groove Width'] = '4.5 '; attrValueMap['Element Height (mm)'] = '11.8 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Inside Diameter (mm)'] = '8 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Outside Diameter (mm)'] = '40 '; attrValueMap['Groove Width'] = '4.5 '; attrValueMap['Maximum Working Temperature (C)'] = '120 '; attrValueMap['Element Height (mm)'] = '11.8 '; attrValueMap['Seal Material'] = 'Z5086 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Element Height (mm)'] = '14 '; attrValueMap['Outside Diameter (mm)'] = '50 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '10 '; attrValueMap['Groove Width'] = '4.5 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Inside Diameter (mm)'] = '12 '; attrValueMap['Outside Diameter (mm)'] = '63 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Groove Width'] = '5.5 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Element Height (mm)'] = '12.1 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Inside Diameter (mm)'] = '12 '; attrValueMap['Outside Diameter (mm)'] = '63 '; attrValueMap['Minimum Working Temperature (C)'] = '-20 '; attrValueMap['Groove Width'] = '5.5 '; attrValueMap['Maximum Working Temperature (C)'] = '120 '; attrValueMap['Element Height (mm)'] = '12.1 '; attrValueMap['Seal Material'] = 'Z5086 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Element Height (mm)'] = '14 '; attrValueMap['Inside Diameter (mm)'] = '12 '; attrValueMap['Outside Diameter (mm)'] = '63 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Groove Width'] = '4.5 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Outside Diameter (mm)'] = '80 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Groove Width'] = '5.5 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '16 '; attrValueMap['Element Height (mm)'] = '12.1 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Maximum Working Temperature (C)'] = '80 '; attrValueMap['Outside Diameter (mm)'] = '80 '; attrValueMap['Minimum Working Temperature (C)'] = '-30 '; attrValueMap['Groove Width'] = '5.5 '; attrValueMap['Seal Material'] = 'Z5051 '; attrValueMap['Inside Diameter (mm)'] = '16 '; attrValueMap['Element Height (mm)'] = '16 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length); var attrValueMap = {}; attrValueMap['Minimum Working Temperature (C)'] = '-35 '; attrValueMap['Seal Material'] = 'Z5071 '; attrValueMap['Groove Width'] = '2.8 '; attrValueMap['Element Height (mm)'] = '7.5 '; attrValueMap['Outside Diameter (mm)'] = '20 '; attrValueMap['Inside Diameter (mm)'] = '6 '; attrValueMap['Maximum Working Temperature (C)'] = '100 '; attrArray.push(attrValueMap); console.log("attrArray : "+attrArray.length);