LV Series Paint Compatible Compressed Air Filter

Where to Buy

Compressed air filters providing guaranteed silicone-free compressed air for paint applications in the automotive industry.

Technical Specifications

Maximum Flow Rate: 18 to 21777 CFM at 100 psig
Port Size: G 1/4 to DN300 inch
Maximum Operating Pressure: 16 barg, 232 psig
Brand: Zander
Compatible Element: 1030_/LV to 5075_/LV
Height: 150 to 1970 mm, 6 to 77.6 inch
Width: 61 to 940 mm, 2.4 to 37 inch
Weight: 0.6 to 520 kg, 1.3 to 1146.4 lb

Safety Warning

Full Product Description

A high quality finish is essential, especially in the automotive industry, where blisters, craters and loss of adhesion are the common results of compressed air contamination. These problems can cause costly product spoilage, expensive re-work and loss of valuable production.

Working closely for many years with automotive manufacturers and the producers of water and solvent based paints, Parker ZANDER understands the industry and its special needs. Ordinary filters may clean compressed air but can release silicone into the compressed air stream from lubricants, cleaning agents, 'o'-rings or other component parts. Silicone is recognized as the worst possible contaminant in paint spraying applications and Parker ZANDER assemble the LV Series Paint Compatible Filters in a silicone-free atmosphere and manufacturing area using only certified silicone-free components.

Features and Benefits
• Guaranteed to be silicone-free

• Designed to match the exacting requirements of the automotive industry

• Remove dirt, water and oil to the highest ISO 8573.1 industry standard

• Independently tested

Sizing and Selection
Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.