var attrArray = new Array();
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '72-3000 PSI, 5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1450 PSI, 100 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '72-3000 PSI, 5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1450 PSI, 100 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '72-3000 PSI, 5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1450 PSI, 100 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '72-3000 PSI, 5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1450 PSI, 100 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '72-3000 PSI, 5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1450 PSI, 100 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '72-3000 PSI, 5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1450 PSI, 100 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '144-5000 PSI, 10-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2900 PSI, 200 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '144-5000 PSI, 10-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2900 PSI, 200 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '144-5000 PSI, 10-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2900 PSI, 200 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '144-5000 PSI, 10-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2900 PSI, 200 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '144-5000 PSI, 10-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2900 PSI, 200 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '32 GAL/MIN, 120 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '144-5000 PSI, 10-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2900 PSI, 200 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '100-2000 PSI, 6.9-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '3500 PSI, 245 BAR ';
attrValueMap['Pressure Control Range'] = '1500-3000 PSI, 103-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Screw in cartridge valve ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GPM, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5000 PSI, 350 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Knob ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Screw ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-3000 PSI, 34.5-210 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1500 PSI, 103.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '5 PSI, 0.3 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '20 PSI, 1.4 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-2000 PSI, 34.5-138 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '1000 PSI, 69 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '50 PSI, 3.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '65 PSI, 4.5 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '16 GAL/MIN, 60 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '500-5000 PSI, 34.5-350 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Tamper Resistant ';
attrValueMap['Standard Setting Pressure'] = '2500 PSI, 172 BAR ';
attrValueMap['Seal Material'] = 'Fluorocarbon ';
attrValueMap['Mounting Type'] = 'Line Mounted ';
attrValueMap['Cracking Pressure'] = '100 PSI, 6.9 BAR ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'D-Ring (Standard) ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Flow Rate'] = '20 GAL/MIN, 75 L/MIN ';
attrValueMap['Maximum Inlet Pressure Rating'] = '5500 PSI, 380 BAR ';
attrValueMap['Pressure Control Range'] = '100-1000 PSI, 6.9-69 BAR ';
attrValueMap['Adjustment Mechanism'] = 'Fixed ';
attrValueMap['Standard Setting Pressure'] = '500 PSI, 34.5 BAR ';
attrValueMap['Seal Material'] = 'Nitrile ';
attrValueMap['Mounting Type'] = 'Motor Mounted ';
attrValueMap['Cracking Pressure'] = 'N/A ';
attrArray.push(attrValueMap);