Rubber-to-Substrate Adhesives

Filtrar por

No hay ningún filtro seleccionado

Base

Elastómero

Tipo de productos

Number of Components

Marca

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.

Rubber-to-Substrate Adhesives

Rubber-to-Substrate Adhesives

Nuestros adhesivos de caucho a sustrato sobresalen en diversas industrias, ofreciendo un valor confiable en varias aplicaciones.

Autoseal® 459D primer is used to promote adhesion to thermoplastic elastomers (TPE), polyolefins (TPO) and EPDM. It has a lowered amount of HAPs (<1.6%) in the solvent blend as well as added fluorescent dye.
Viendo 10 de 1
Mostrar más

Autoseal® RC-1023 primer is designed for promoting adhesion to polyvinyl chloride (PVC), polybutylene terephthalate (PBT), and polyethylene terephthalate (PET). It can be used in conjunction with a variety of double-sided tapes.
Viendo 10 de 1
Mostrar más

Autoseal® RC-1028K primer is designed for promoting adhesion to vulcanized EPDM, thermoplastic polyolefins (TPO), and polypropylene (PP). It can be used in conjunction with a variety of double-sided tapes.
Viendo 10 de 1
Mostrar más

Autoseal® RC-3007S two-component automotive weatherstrip coating is used on EPDM sponge seals. It provides excellent slip resistance, improving noise reduction associated with automotive vibration and imparting ice-release in cold weather environments.
Viendo 10 de 1
Mostrar más

Flocklok® 550P adhesive is used to adhere polyester or nylon flock fibers to a variety of uncured and semi-cured elastomers. It will react and cure with moisture; however, an elevated temperature cure is required to optimize performance properties.
Viendo 10 de 1
Mostrar más

Flocklok® 852 single-coat adhesive is used to adhere polyester or nylon flock fibers to a variety of elastomers. It will react and cure with moisture; however, an elevated temperature cure is required to optimize adhesion and performance properties.
Viendo 10 de 1
Mostrar más

Flocklok® 852F single-coat adhesive is used to adhere polyester or nylon flock fibers to a variety of elastomers. It will react and cure with moisture; however, an elevated temperature cure is required to optimize adhesion and performance properties.
Viendo 10 de 1
Mostrar más

Flocklok® 853A adhesive is a blocked, heat-curing, single-coat adhesive used to adhere polyester or nylon flock fibers to a variety of elastomers. Flocked substrates provide good resistance to abrasion.
Viendo 10 de 1
Mostrar más

Flocksil® 1501 SF polyurethane adhesive is used to adhere polyester or polyamide flock fibers to a variety of uncured and semi-cured elastomers. When used in combination with a surface treatment, it can be used for flocking of a variety of TPEs.
Viendo 10 de 1
Mostrar más

Chemlok® 855-1 adhesive is a general purpose, one-coat water-based adhesive used to bond a wide variety of vulcanized and unvulcanized rubber compounds to metal.
Viendo 10 de 1
Mostrar más

Chemlok® 8560D-1 adhesive is a general purpose, one-coat water-based adhesive that bonds a wide variety of vulcanized and unvulcanized rubber compounds to metal. It is suitable for dip applications and may be diluted for spraying.
Viendo 10 de 1
Mostrar más

Chemlok® 8560S-1 adhesive is a general purpose, one-coat water-based adhesive that bonds a wide variety of vulcanized and unvulcanized rubber compounds to metal.
Viendo 10 de 1
Mostrar más

Chemlok® 144 primer is a one-coat, moisture-cure primer used to prime and/or bond a variety of polar substrates. Chemlok 144 primer contains a fluorescent agent to identify its presence when exposed to UV light; primer is transparent under normal light.
Viendo 10 de 1
Mostrar más

Chemlok® 205 primer/adhesive is a heat-activated material designed for use as either a substrate primer or as a one-coat adhesive for bonding unvulcanized nitrile elastomer compounds.
Viendo 10 de 1
Mostrar más

Chemlok® 205A primer is designed for use under Chemlok covercoat adhesives to bond a wide variety of rubber compounds to metals and other rigid substrates. Chemlok 205A primer is an excellent one-coat adhesive for bonding some nitrile rubber compounds.
Viendo 10 de 1
Mostrar más

Chemlok® 205LH primer is a low Hazardous Air Pollutant (HAP) primer designed for use under Chemlok covercoat adhesives to bond a wide variety of vulcanized and unvulcanized rubber compounds to metals and other rigid substrates.
Viendo 10 de 1
Mostrar más

Chemlok® 207 primer is a solvent-based metal primer that provides excellent resistance in a wide range of environmental conditions.
Viendo 10 de 1
Mostrar más

Chemlok® 207LH primer is a low Hazardous Air Pollutant (HAP) primer designed for use under Chemlok 6411LH covercoat adhesive to bond a wide variety of vulcanized and unvulcanized rubber compounds to metals and other rigid substrates.
Viendo 10 de 1
Mostrar más

Chemlok® 208A primer is specifically developed for use with Chemlok 220B adhesive, Autoseal 3370 adhesive and other selected Chemlok covercoat adhesives in coil coating applications.
Viendo 10 de 1
Mostrar más

O adesivo Chemlok® 213 é de uma demão para unir elastômeros de uretano fundíveis e RIM a metais, poliéteres e poliésteres, além de TPUs específicos
Viendo 10 de 1
Mostrar más

Chemlok® 217 adhesive is a one-coat adhesive that bonds nitrile or neoprene elastomers to metals or other substrates during vulcanization of the elastomer. It allows processing latitude, readily adapting to conventional application & molding methods.
Viendo 10 de 1
Mostrar más

Chemlok® 218 adhesive is a one-coat adhesive used to bond castable and millable polyurethane elastomers to metals and other rigid substrates.
Viendo 10 de 1
Mostrar más

Chemlok® 219 adhesive can be used as a one-coat adhesive or a primer in combination with Chemlok 213 adhesive for applications requiring increased environmental resistance. It is used for bonding polyether and polyester castable urethanes to metal.
Viendo 10 de 1
Mostrar más

Chemlok® 2332 adhesive is a covercoat adhesive that bonds a wide variety of unvulcanized or vulcanized rubber compounds to primed metals or other rigid substrates. It will also bond treated textiles to rubber during the vulcanization process.
Viendo 10 de 1
Mostrar más

Chemlok® 234B (NW) adhesive is a general purpose covercoat adhesive designed for use over Chemlok 205 primer to bond a wide variety of vulcanized or unvulcanized rubber compounds to metal or other rigid substrates.
Viendo 10 de 1
Mostrar más
Close [ x ]
Full Screen
687PDC
687PDC