AVAILABILITY: A sampling of Parker’s part numbers are shown in the configurator above for select materials and sizes. If the material and dimensions required are not shown, assistance with part number configuration may be found in the literature documents in the Product Support tab. To check current tooling, review the Part Number Look-up document. Contact Parker for requirements outside typical ranges.

Parker’s AY profile, premium double-lip wiper is used in light to heavy-duty hydraulics. When used in high pressure applications with the proper Parker rod seals, the AY profile complements the sealing system by providing an additional beveled sealing lip, yielding excellent film-breaking and the driest rod sealing available. These dual acting features along with its space-saving single-gland configuration, enable it to be used by itself in low pressure applications as both the rod seal and the wiper. Knife-trimmed sealing lips ensure the best possible film breaking.

NOTE: When using the AY wiper in conjunction with other rod seals, it is important to select a rod seal profile that enables pressure relief of fluid into the system, otherwise a pressure trap may form between the wiper and rod seal. Suggested rod profiles are Parker’s BT Profile, BS Profile, and B3 Profile U-cup seals.

Standard Materials:
• P4300A90 Resilon® polyurethane; Temp -65 / +275F; Surface speed <1.6 ft/s
• P4301A90 Resilon polyurethane; Temp -35 / +275F (+225F in water); Surface speed <1.6 ft/s
• P4700A90 Polyurethane; Temp -65 / +200F; Surface speed <1.6 ft/s

Alternate Materials: For applications that may require an alternate material, please contact your Parker EPS representative.

Note: Metric dimensions according to DIN ISO 6195, Type C.

Typical applications:
• Dynamic sealing of hydraulic cylinders