Symmetrical Rod and Piston Seal Prädifa series TA, Ultrathan® | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Diámetro interior (mm)

Diámetro exterior (mm)

Altura del elemento (mm)

Ancho de la ranura

Temperatura mínima de servicio (C)

Temperatura máxima de servicio (C)

Material de la junta

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
Symmetrical Rod and Piston Seal Prädifa series TA, Ultrathan® Symmetrical Rod and Piston Seal Prädifa series TA, Ultrathan®

Symmetrical Rod and Piston Seal Prädifa series TA, Ultrathan®

Puntos de venta

Rod seal for hydraulic cylinders, single-acting, polyurethane compact PARK-O-PAK® design. For high-pressure applications. Robust seal profile for harsh operating conditions. Long axial assembly length.

Especificaciones técnicas

  • Diámetro interior: 15 to 685.8 mm
  • Diámetro exterior: 25 to 711.2 mm
  • Medio: Hydraulic
  • Opciones de material de polímero: Thermoplastic Polyurethane (TPU, Resilon®, Ultrathan®)
  • Presión de trabajo máxima: 350 bar
  • Temperatura mínima de funcionamiento: -30 °C
  • Temperatura máxima de funcionamiento: 80 °C
  • Velocidad de corte máxima: 0.5 m/sec
  • Unidad de medida: Length: mm
  • Mecanismo de amortiguación: No
  • Tipo de aplicación térmica: Standard Moderate Temperature (-35 to 100°C)
  • Rango de presión: High Pressure (< 500 bar)
Safety Warning

Descripción completa del producto

The PARK-O-PAK® rod seal TA made of wear-resistant Ultrathan® is a compact seal design for hydraulic applications. Due to its symmetric design, the seal can also be used as a piston seal.
The O-ring guarantees the pre-loading of the seal lips, even under low pressures or vacuum. Due to the good setting behavior of the elastomer O-ring, this pre-loading is largely constant. As system pressure increases, compression of the sealing edges rises due to the pressure-dependent deformation of the seal profile.

There are three variants of the PARK-O-PAK® product series. The product series BA is suitable for standard grooves, e.g. according to ISO 5597. The product series SA is suitable for axially short compact designs. The product series TA is suitable for radially slim designs, e.g. for telescopic cylinders.

• Robust seal profile for harshest operating conditions.
• Extreme wear resistance.
• Easier installation.
• Insensitive to pressure peaks.
• High extrusion resistance.
• Excellent media resistance in case of suitable compound selection.
• Suitable compounds available for special requirements of the chemical process industry.
• Suitable compounds available for special requirements of the food processing industry.
• Installation in closed and undercut housings.
• Low compression set.
• Further dimensions of machined series with short lead times available.

Range of application:
Mainly for the sealing of piston rods and plungers in heavy duty applications in mobile and stationary hydraulics.

The TA rod seal is available in the following compounds:
00030 - Industrial applications
00020 - Light-duty
00043 - Low temperatures
00064 - Heavy-duty

Documentos relacionados

Literature and Reference Materials
Installation Guidelines for Piston Seals--PTD3350
Installation Guidelines for Rod Seals--PTD3350
Storage and Cleaning of Elastomer Seals--PTD3032
Product Demos & Tutorials
How to Properly Store and Clean Elastomer Seals
Mixing the right ingredients: Material Development at Parker-Prädifa
×
Ver catálogos
compartir / correo electrónico
Imprimir
Productos Diámetro interior (mm) Diámetro exterior (mm) Altura del elemento (mm) Ancho de la ranura Temperatura mínima de servicio (C) Temperatura máxima de servicio (C) Material de la junta
TAA05800030 100 115 12 13 -30 80 P5004
TA605500030 60 75 11.4 12.5 -30 80 P5004
TA801400030 80 90 11.4 12.5 -30 80 P5004
TA803400030 80 95 11.4 12.5 -30 80 P5004
Close [ x ]
Full Screen
687PDC
687424