The maximum number of products that can be compared is 4. Please refine your selection.
Está a punto de agotarse el tiempo de espera de su sesión por falta de actividad. Haga clic en OK para ampliar el tiempo en 0 minutos.
Poppet Type Logic Element
318610
false
[
]
This item has been successfully added to your list.
Este sitio utiliza cookies para ofrecerle la mejor experiencia posible. Si continúa navegando o si permanece en el sitio, acepta el uso que hagamos de tales cookies de acuerdo con nuestra
Política de privacidad.
. Obtenga más información, incluso cómo gestionar las cookies
aquí.
Poppet Type Logic Element | Product Series
var attrArray = new Array();
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '80 GAL/MIN, 303 L/MIN ';
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Polyurethane EPS ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Caudal'] = '50 GAL/MIN, 189 L/MIN ';
attrValueMap['Configuración'] = 'Vent to Open ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'Fluorocarbon ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '25 PSI, 1.7 BAR ';
attrValueMap['Material de la junta'] = 'D-Ring (Standard) ';
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Material de la junta'] = 'D-Ring (Standard) ';
attrValueMap['Presión de conmutación'] = '50 PSI, 3.5 BAR ';
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Material de la junta'] = 'D-Ring (Standard) ';
attrValueMap['Presión de conmutación'] = '75 PSI, 5.2 BAR ';
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Presión de conmutación'] = '100 PSI, 6.9 BAR ';
attrValueMap['Material de la junta'] = 'D-Ring (Standard) ';
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Configuración'] = 'Pilot to Close ';
attrValueMap['Material de la junta'] = 'D-Ring (Standard) ';
attrValueMap['Presión de conmutación'] = '150 PSI, 10.3 BAR ';
attrValueMap['Caudal'] = '15 GAL/MIN, 57 L/MIN ';
attrArray.push(attrValueMap);
Parker logic elements are screw-in type cartridge valves that can be used to control flow, pressure, or direction up to 303 lpm and 240 bar, and when applied in the proper arrangements, can perform multi-task control functions.
Especificaciones técnicas
Caudal:
15, 50, 80 gal/min, 57, 189, 303 L/min
Configuración:
Normally Closed
Presión de conmutación:
25, 50, 75, 100, 150 psi, 1.7, 3.5, 5.2, 6.9, 10.3 bar
Material de la junta:
D-Ring (Standard), Fluorocarbon, Polyurethane EPS
Tipo de accionamiento:
Pilot to Close, Vent to Open
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems..
Click here to view all product safety information.
Descripción completa del producto
Parker’s poppet type logic element valve family features a versatile range of screw-in elements that, when used in the proper combinations, can provide flexible design solutions for many common cartridge valve applications with flows up to 303 lpm (80 gpm) and pressures up to 240 bar (3500 psi). Parker logic elements are small pilot controlled devices that offer system designers the advantage of using these valves in applications where the flow and pressure conditions may exceed the limits of typical cartridge valves. They can be used to control flow, pressure, or direction, and when applied in the proper arrangements, can perform multi-task control functions and will help reduce the size, cost, and complexity of integrated manifold systems.
Markets: • Aerial • Construction Equipment • Material Handling Equipment • Miscellaneous Mobile
Features/Benefits: • Low leakage design • High flow capability • Hardened, precision ground parts for durability • All external parts zinc plated
Applications: • Boom actuation • Outrigger control • Steering • Winch control
Additional Technical Insight: Logic elements are commonly used in conjunction with smaller, low flow solenoid or pilot valves in order to provide pilot pressure to the logic element for higher flow applications.
