CHO-SHRINK Electrically Conductive Heat Shrink Boots | Parker NA

CHO-SHRINK Electrically Conductive Heat Shrink Boots | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Tipo de productos

Serie del producto

Diámetro interior

Tipo de adhesivo

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.

CHO-SHRINK Electrically Conductive Heat Shrink Boots

CHO-SHRINK Electrically Conductive Heat Shrink Boots

Puntos de venta

Parker Chomerics CHO-SHRINK 1061 silver coated and CHO-SHRINK 1120 silver-plated copper coated electrically conductive heat shrinkable boots are designed to provide lightweight connector EMI shielding.

Especificaciones técnicas

  • Configuración: Boot
  • Diámetro interior recubierto: 0.41 inch, 10.41 mm, 0.56 inch, 14.22 mm, 0.70 inch, 17.78 mm, 0.88 inch, 22.35 mm, 1.11 inch, 28.19 mm, 1.38 inch, 35.05 mm, 1.75 inch, 44.45 mm, 0.26 inch, 6.60 mm, 0.22 inch, 5.59 mm, 0.28 inch, 7.11 mm, 0.33 inch, 8.38 mm, 0.39 inch, 9.91 mm, 0.62 inch, 15.75 mm
  • Tipo de conexión: MIL-DTL-26482, MIL-DTL-5015 and MIL-DTL-26482, MIL-DTL-5015, 9 Pin, 15 Pin, 25 Pin, 37 Pin, 50 Pin, 255-15-30-210
  • Revestimiento: Inside Only
  • Material de relleno: Silver, Silver-plated Copper
  • Durómetro: 50 ± 10 Shore D
  • Temperatura de funcionamiento: -66 to 275 °F, -54 to 135 °C
  • Resistencia dieléctrica: 200 VAC/mil
  • Pérdida de masa total de desgasificación: 0.67 % TML (0.04% CVCM), 0.68 % TML (0.05% CVCM)
  • Clasificación de inflamabilidad: UL VW-1
  • Vida útil en depósito: 2 years
  • Material del tubo: Polyolefin
  • Nivel de blindaje de ruido: 70 to 80 dB, 50 to 60 dB
Safety Warning

Descripción completa del producto

CHO-SHRINK electrically conductive heat shrink boots are available in two performance options: CHO-SHRINK 1061, coated with silver, designed for higher end military and aerospace applications, and CHO-SHRINK 1120, coated with silver-plated copper, and designed for commercial applications. Both provide lightweight cable and connector EMI shielding with easy installation and assembly by conventional heat guns and ovens. CHO-SHRINK boots are available with and without an adhesive lining, which melts when the transition is heated and bonds to the underlying surface, creating a water-resistant seal.

Both CHO-SHRINK materials are ideal for any applications where weight savings associated with EMI cable shielding is of paramount importance. The product consists of polyolefin heat shrinkable boots that are coated with Parker Chomerics unique silver or silver-copper plated filled coating systems. CHO-SHRINK boots are available coated only inside.

The CHO-SHRINK cable shielding system includes tubing, connector boots, cable transitions and boot adaptors – and allows for relatively easy assembly of shielding systems for complex cable wiring harnesses using conventional heat shrink tubing heating devices.
The system offers excellent shielding and significant weight savings over traditional metal braid cable shielding systems. In addition, CHO-SHRINK offers an environmental shield against dust, moisture and other contaminants. CHO-SHRINK remains flexible to support any needed cable routing. Easy repair or rework of cables is facilitated by cutting off the CHO-SHRINK material and installing new material.

CHO-SHRINK materials are ideal for installation on cabling for medical device electronic assemblies which require reliable EMI shielding performance and may benefit from silver’s antimicrobial properties. Typical applications can include; missiles, aircraft, satellites, vehicles, and on cables of any other electronics systems where weight savings is mandatory.

Features and Benefits:
• Meets NASA outgassing specs for space use
• Available with or without adhesive
• 50-60 dB attenuation above 500 MHz for CHO-SHRINK 1120
• 70-80 dB attenuation above 500 MHz for CHO-SHRINK 1061
• Simplifies connector and transition shielding design
• Shrink to a wide range of cable diameters (shrink ratio is 4:1 at the cable end). They can be supplied with a conductive hot melt adhesive/sealant applied to each end
• Provide EMI shielding, cable shield grounding, and strain relief at connector backshell terminations
• Dramatic weight savings vs. conventional braided mesh

Typical Applications:
• Medical devices
• Automotive cable assemblies
• Missiles
• Satellites
• Any light-weighting application

Documentos relacionados

Literature and Reference Materials
Brochure: EMI/EMC and Product Safety Compliance Testing Services
Case Study: Medical Cable Assembly Manufacturer Required Cable Shielding to Reduce Radiated Emissions
Datasheet: CHO-SHRINK 1061
Datasheet: CHO-SHRINK 1120
Parker Chomerics North America Terms and Conditions of Sale
Contact & Support Information
Request a Chomerics Product Sample
Find Your Local Parker Chomerics Sales Rep or Distributor
Request a Quote
Compliance, Certifications & Safety
Parker Chomerics Safety Data Sheets (SDS)
Product Compliance: China RoHS Compliant
Product Compliance: EU PFOS Compliant
Product Compliance: EU RoHS Compliant
Product Compliance: REACH SVHC Meets Requirements
Product Demos & Tutorials
Parker Chomerics Product Case Studies
Parker Chomerics Upcoming Webinars & On Demand Webinars
Selector Guides
Healthcare and Life Sciences Solutions - Medical Devices Manufacturing Products
×
compartir / correo electrónico
Imprimir
Close [ x ]
Full Screen
687PDC
179336