Portable Oil Filter - MXP5E-1
Portable Oil Filter MXP5E - Data Sheet #VEL1996
Superdri® Handcart Filter System
- Remove dissolved water from transformer oil without heat and vacuum
- 5 GPM Flow Rate
FEATURES
- Flow control bypass
- Filter bypass
- Digital flowmeter/totalizer
- Sample taps
- Portable handcart mounted
DESCRIPTION
The MXP5E comes with all the features needed for proper use of Velcon Superdri® Cartridges for dissolved water removal from transformer oil. Parallel flow through the two filter housings assures the proper flow rate through each SD-718 Superdri® cartridge. The unit is also valved so that series flow is possible for non-dissolved water oil handling applications, such as removal of dirt and free water. Use FO filter cartridges in the first housing to remove dirt particles. An Aquacon® cartridge in the second stage removes free water. The flowmeter/totalizer feature allows the user to calculate the approximate lifetime of the Superdri® cartridges without an on-line moisture monitor. For dissolved water removal from transformer oil, the MXP5E is an economical alternative to more costly heat and vacuum systems.
ON-LINE OIL DRYING
Vacuum-type LTCs To use the MXP5E on energized vacuum-type LTCs, it is important to have a means for removing air from the system's filters, piping and hoses before circulating the oil. Velcon recommends adding optional vacuum pump (PN 103Y026) when ordering the MXP5E for this application.
APPLICATIONS
The MXP5E-1 Portable Filter can be used for:
- Network transformer filling
- Drying wet LTC Compartments
- Vacuum-type LTC's
- Drum transferring operations
- Dissolved water removal capability for critical oil quality requirement
SPECIFICATIONS
- 5 gpm flow rate
- Epoxy coated vessels
- Band clamp vessel closures
- Max. operating pressure 100 psi
- 10” semi-pneumatic wheels
- Flow control bypass
- Filter bypass
- Flow meter and totalizer
- Self priming positive displacement pump with built in pressure relief valve
- Static pressure gauge, manual air vent, and manual drain valve on each housing
- ½ hp, 115V, 1-phase, 60 htz., 10 amp TEFC motor*
- 10 ft x 3 wire power cord
- 10 ft inlet and outlet hose, ¾” ID w/ ¾” male npt fittings
- Suction y-strainer
- Weight 155 lbs., shipping weight 200 lbs.
- Height: 52”, Width: 24”, Depth: 22”
OPTIONS & ORDERING INFORMATION
Specify model numbers as shown below:
MXP5E-1 115 vac, 1 phase, 60 Hz (basic unit)
MXP5EXP-1 115 vac, 1 phase, 60 Hz, explosion proof*
MXP5E-2 230 vac, 1 phase, 60 Hz
MXP5EXP-2 230 vac, 1 phase, 60 Hz, explosion proof*
MXP5E-7 230 vac, 1 phase, 50 Hz
MXP5EXP-7 230 vac, 1 phase, 50 Hz, explosion proof*
MXP5E-10 Air motor
746Y012 Doble DOMINO® Moisture Sensor
103Y026 Vacuum pump
*Note: Explosion proof units shipped without power cord, switch, or plug For stationary base mounted unit, substitute “S” in model number for “P”. Example: MXS5E-1 = stationary base mtd 5 gpm filter pump, 115 vac, 1 ph, 60 Hz
CARTRIDGE SELECTION
The MXP5E portable filter accepts all Velcon standard 618/718 size cartridges. Cartridges are available for removal of free water, dirt, and acids. Contact your local Velcon representative for a complete listing of available cartridges and their applications.
Parallel Operation: Use ( 2) SD-718 Series Flow: Use (1) FO-718PL1/2 and (1) AC-71801
RECOMMENDED SPARES
6 cartridges
1 G-1016 Buna-N lid gasket
Note: If Viton-A lid gaskets are desired, order 2 G-1016A
