Automotive Coatings

Filtrar por

No hay ningún filtro seleccionado

Elastómero

Tipo de productos

Number of Components

División

Marca

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.

Automotive Coatings

Automotive Coatings

Increase the lifetime of automotive sealings and significantly contribute to passenger comfort by reducing squeak and itch noises. Parker LORD's Sipiol® weatherstrip coatings and Autoseal® coatings are formulated to withstand challenging environments.

LORD® JMC-700K coating is a thermal-cure epoxy resin specially designed for thin film coating of heat sinks and magnets and provides electrical insulation, heat resistance, and oil resistance with a single coat application.
Viendo 10 de 1
Mostrar más

Sipiol® WL 1025-21 coating is an aqueous, single-component, anti-friction coating designed for in-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a structured surface.
Viendo 10 de 1
Mostrar más

Sipiol® WL 1026-21 coating is an aqueous, single-component, anti-friction coating designed for in-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a micro-structured surface.
Viendo 10 de 1
Mostrar más

Sipiol® WL 1120-21 coating is a smooth, aqueous, single-component, anti-friction coating designed specifically for in-line application during production of automotive sealing systems.
Viendo 10 de 1
Mostrar más

Sipiol® WL 1120-23 coating is a smooth, aqueous, single-component, anti-friction coating designed specifically for in-line application during production of automotive sealing systems.
Viendo 10 de 1
Mostrar más

Sipiol® WL 1620-21 G coating is an aqueous, single-component, transparent glossy anti-friction coating used for in-line application during production of colored elastomers, such as o-rings.
Viendo 10 de 1
Mostrar más

Sipiol® WL 2010-23/WV 21 F coating is a smooth, aqueous, two-component anti-friction coating designed specifically for off-line application during production of automotive sealing systems. Addition of Sipiol WV 21 F curative is required.
Viendo 10 de 1
Mostrar más

Sipiol® WL 2010-24/WV 21 F coating is a smooth, aqueous, two-component anti-friction coating designed specifically for off-line application during production of automotive sealing systems. Addition of Sipiol WV 21 F curative is required.
Viendo 10 de 1
Mostrar más

Sipiol® WL 2015-22P/WV 21 F coating is an aqueous, two-component, anti-friction coating designed specifically for off-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a structured surface.
Viendo 10 de 1
Mostrar más

Sipiol® WP 8556 aqueous, heat-activated primer is designed for use under Sipiol and Autoseal anti-friction coatings to improve adhesion to extruded and cured EPDM profiles. Primer is compatible with coatings based on acrylics and polyurethanes.
Viendo 10 de 1
Mostrar más

Sipiol® UV E1014790 coating is a single-component, flexible, dielectric coating that cures in seconds. Provides comparable dielectric protection as PET film with minimal risk of delamination from the substrate.
Viendo 10 de 1
Mostrar más
Close [ x ]
Full Screen
687852
687852