Adhesivos Aeroespaciales

Filtrar por

No hay ningún filtro seleccionado

Adhesive Chemistry

Tipo de productos

Number of Components

Marca

Cure Time

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.

Adhesivos Aeroespaciales

Adhesivos Aeroespaciales

Los adhesivos de epoxi, uretano y acrílico para aeroespacial de Parker's LORD unen materiales preparados de grado aeroespacial, confiables para componentes críticos y fabricados en plantas ubicadas en EE. UU.

Fusor® 309-1D/309-2D adhesive is a high performance, thixotropic, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface.
Viendo 10 de 1
Mostrar más

LORD® 306-1/306-2 epoxy adhesive system is used for applications that require gap filling or non-sag characteristics on a vertical surface. Conforms to military specification MIL-A-24456 for bonding plastic vibration damping tiles to steel.
Viendo 10 de 2
Mostrar más

LORD® 309-1D GB/309-2D epoxy adhesive system is for applications requiring gap filling or non-sag characteristics on vertical surface. Provides excellent adhesion to prepared metals & rubber, FRP, & wood. Glass beads allow control of bondline thickness.
Viendo 10 de 1
Mostrar más

LORD® 310-A/310-B adhesive system is used to bond many types of prepared metals, prepared rubber, urethane and plastics. Also used to bond disk drives, down-hole oil field equipment, automotive body panels and spoilers, and vibration damping mounts.
Viendo 10 de 2
Mostrar más

LORD® 3170-A/3170-B adhesive is an equal-mix, epoxy structural adhesive system used to bond metals, glass, reinforced plastics, ceramics and foam materials for cryogenic applications.
Viendo 10 de 1
Mostrar más

LORD® 403 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
Viendo 10 de 4
Mostrar más

LORD® 406 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
Viendo 10 de 10
Mostrar más

LORD® 410 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
Viendo 10 de 2
Mostrar más

LORD® 459X adhesion enhancer/surface modifier is a primer in xylene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.
Viendo 10 de 3
Mostrar más

LORD® 7450-A/B urethane adhesive system is designed for applications where the cured material will be exposed to cryogenic temperature environments. It provides a tough elastomeric polymer for use in diverse technologies.
Viendo 10 de 1
Mostrar más

LORD® 7701 adhesion enhancer/surface modifier is used on various vulcanized and thermoplastic polymeric materials to alter the surface of the rubber, making it more receptive to bonding. It is used in conjunction with a broad range of LORD adhesives.
Viendo 10 de 2
Mostrar más

LORD® 7713 adhesion enhancer/surface modifier is a single-component, room temperature curing primer used for adhesion bonding of glass reinforced polyester substrates.
Viendo 10 de 1
Mostrar más

This product is no longer available - please contact us for further assistance.
Viendo 10 de 2
Mostrar más
Close [ x ]
Full Screen
687852
687852