RS- Hand Shut- Off/ Expansion Valves

Puntos de venta

The RS Shut- off/ Expansion Valves were designed and built to maintain reliability both in their seating and back seating functions.

Especificaciones técnicas

Número de modelo: Please Configure Part for Model Number
Presión de trabajo máxima: 27.6 bar, 400 psig
Temperatura mínima del fluido: -50 to -29 °C, -60 to -20 °F
Temperatura máxima del fluido: 149 to 204 °C, 300 °F, 400 °F
Coeficiente del caudal: Not Applicable or Please Reference Associated Documentation
Tipo de válvula: Hand Shut-Off, Hand Expansion
Estilo del cuerpo: Globe T, Globe Y, Angle
Tamaño del puerto: 6 to 300 mm, 1/4 to 12 inch
Tipo de conexión: Socket Weld, FPT, Butt Weld, Weld Neck
Tipo de capó: Standard Bonnet, Extended Bonnet
Tipo de mango: Seal Cap, Hand Wheel
Tipo de recubrimiento: No Plating, Plated
Material del cuerpo: Cast Steel (A-352 GR, LCB)
Material del sombrerete: Forged Steel, LCB Cast Steel, Ductile Iron, Carbon Steel
Material del vástago: 304 Stainless Steel
Material de embalaje: 25% Carbon Filled PTFE

Descripción completa del producto

The complete Industrial Refrigeration line of Hand Shut-Off and Expansion Valves with bolt-on bonnets are designed and built to maintain reliability both in their seating and back seating functions. This entire line is supplied with stainless steel stems for maximum corrosion resistance and back seating capability. A unique carbon filled PTFE seat is standard throughout the line, lending durability to the seating surface. In addition, a dual O-ring stem packing design along with a stem packing seal is standard on all valves 1⁄4” thru 12” (Shut- Off) and ¼” thru 2” (Expansion). This innovative design seals both the valve stem and bonnet bore with independent O-rings, which are captured in a carbon PTFE carrier. The addition of the packing provides for backup sealing capability in the unlikely event of an O-ring failure. A packing nut design with either 1⁄4” or 5⁄16” flats provides a generous wrench engagement area, with little likelihood of “rounding” the flats. With the O-ring cartridge used in all valve bonnets, there will typically be no need to loosen the packing nut when opening or closing a valve. In most cases, stem resistance will be negligible, allowing the valve to be easily repositioned.
The extended bonnet is available for globe style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves and should not be exchanged with seal caps from other R/S service valves.

Markets:
• Industrial Refrigeration
• Commercial Refrigeration

Hand Shut- Off Valve Features and Benefits:
• ASTM 352 LCB Cast Steel Body 6 – 300 mm (1⁄4” - 12”)
• Fluid Temperature Range: -50° C to 204° C (-60° F to 400° F)
• Type 303 Stainless Steel Stem and packing nut; 304 Stainless Steel Bolts
• Reliable Back Seating
• Complete Line of Bolted Bonnets
• 25% Carbon Filled PTFE Seat
• Linear flow “Y” Pattern Globe
• Bodies (11⁄4” - 12”) for Low Pressure Drop
• Extended Bonnets for Insulation
• Hand wheel and Seal Cap Interchangeable on Same Valve

Hand Expansion Valve Features and Benefits:
• ASTM 352 LCB Cast Steel Body (1/4” thru 2”)
• Maximum Safe Working Pressure 400 PSIG
• Fluid Temperature Range: -50°F to +300°F
• 300 Series Stainless Steel Stem
• 300 Series Stainless Packing Nut
• Optional Stainless Steel Bonnet Bolts
• Reliable Back Seating
• Bolted Bonnets
• 25% Carbon Filled PTFE Seat (1/4” thru 2”)
• Available Connections:
o 1/4” thru 1-1/2”, Screwed End
o 1/4” thru 2”, Socket Weld
o 1-1/4” thru 2”, Butt Weld
• Globe Body - Tee and Angle Styles
• Extended Bonnets For Thicker Insulation Optional

Application:
• Ammonia
• Fluorocarbons
• Nitrogen
• Carbon Dioxide

Documentos relacionados

Literature and Reference Materials
Bestobell--Marine Valves--5190-BBM
Embracing High Pressure Demands In The Marine Sector
Hand Expansion Valves (Bul. 82-00)
Installation Bulletin - Hand Shut-Off and Expansion Valves
Operating Instructions PGHV-RACE
Product Bulletin 80-01 L Hand Shut Off Valves
Product Bulletin 81-00 PGHV RACE
Product Bulletin 83-00 X Large Shut Off Valves

Compliance, Certifications & Safety
RACE--Safety Guide industrial refrigeration products

Ver catálogos

compartir / correo electrónico

Imprimir

Mostrando registros del 1 al 100 de un total de 361 registros

Productos	Estilo de la válvula	Estilo del cuerpo	Tamaño del puerto (mm)	Tamaño del puerto (pulg)	Estilo de la conexión	Sombrero	Mango	Recubrimiento	Estilo de la válvula	Estilo del cuerpo	Tamaño del puerto (mm)	Tamaño del puerto (pulg)	Estilo de la conexión	Sombrero	Mango	Recubrimiento
SGT0025SSBCN	Hand Shut- Off	Globe T	6 mm	1/4"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__6 mm __3	4__1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0025SSBHN	Hand Shut- Off	Globe T	6 mm	1/4"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__6 mm __3	4__1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0025TSBCN	Hand Shut- Off	Globe T	6 mm	1/4"	FPT	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__6 mm __3	4__1/4 __4	5__FPT __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0025TSBHN	Hand Shut- Off	Globe T	6 mm	1/4"	FPT	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__6 mm __3	4__1/4 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0038SSBCN	Hand Shut- Off	Globe T	10 mm	3/8"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__10 mm __3	4__3/8 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0038SSBHN	Hand Shut- Off	Globe T	10 mm	3/8"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__10 mm __3	4__3/8 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0038TSBCN	Hand Shut- Off	Globe T	10 mm	3/8"	FPT	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__10 mm __3	4__3/8 __4	5__FPT __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0038TSBHN	Hand Shut- Off	Globe T	10 mm	3/8"	FPT	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__10 mm __3	4__3/8 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0050SEBCN	Hand Shut- Off	Globe T	13 mm	1/2"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0050SEBHN	Hand Shut- Off	Globe T	13 mm	1/2"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0050SSBCN	Hand Shut- Off	Globe T	13 mm	1/2"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0050SSBHN	Hand Shut- Off	Globe T	13 mm	1/2"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0050SSBHY	Hand Shut- Off	Globe T	13 mm	1/2"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SGT0050TEBCN	Hand Shut- Off	Globe T	13 mm	1/2"	FPT	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__FPT __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0050TEBHN	Hand Shut- Off	Globe T	13 mm	1/2"	FPT	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__FPT __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0050TSBCN	Hand Shut- Off	Globe T	13 mm	1/2"	FPT	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__FPT __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0050TSBHN	Hand Shut- Off	Globe T	13 mm	1/2"	FPT	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__13 mm __3	4__1/2 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0075SEBCN	Hand Shut- Off	Globe T	20 mmm	3/4"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0075SEBHN	Hand Shut- Off	Globe T	20 mmm	3/4"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGY0125SSBHY	Hand Shut- Off	Globe Y	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Globe Y __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SGY0125WSBCN	Hand Shut- Off	Globe Y	32 mm	1-1/4"	Butt Weld- Weld Neck	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe Y __2	3__32 mm __3	4__1-1/4 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGY0125WSBHN	Hand Shut- Off	Globe Y	32 mm	1-1/4"	Butt Weld- Weld Neck	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe Y __2	3__32 mm __3	4__1-1/4 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGY0150SEBCN	Hand Shut- Off	Globe Y	38 mm	1-1/2"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe Y __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0100SEBCN	Hand Shut- Off	Angle	25 mm	1"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0100SEBHN	Hand Shut- Off	Angle	25 mm	1"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0100SSBCN	Hand Shut- Off	Angle	25 mm	1"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0100SSBHN	Hand Shut- Off	Angle	25 mm	1"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0100SSBHY	Hand Shut- Off	Angle	25 mm	1"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SAN0100TEBCN	Hand Shut- Off	Angle	25 mm	1"	FPT	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0100TEBHN	Hand Shut- Off	Angle	25 mm	1"	FPT	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0100TSBCN	Hand Shut- Off	Angle	25 mm	1"	FPT	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0100TSBHN	Hand Shut- Off	Angle	25 mm	1"	FPT	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0125SEBCN	Hand Shut- Off	Angle	32 mm	1-1/4"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0125SEBHN	Hand Shut- Off	Angle	32 mm	1-1/4"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0125SSBCN	Hand Shut- Off	Angle	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0125SSBHN	Hand Shut- Off	Angle	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0125SSBHY	Hand Shut- Off	Angle	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SAN0125WEBCN	Hand Shut- Off	Angle	32 mm	1-1/4"	Butt Weld- Weld Neck	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0125WEBHN	Hand Shut- Off	Angle	32 mm	1-1/4"	Butt Weld- Weld Neck	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0125WSBCN	Hand Shut- Off	Angle	32 mm	1-1/4"	Butt Weld- Weld Neck	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0125WSBHN	Hand Shut- Off	Angle	32 mm	1-1/4"	Butt Weld- Weld Neck	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__32 mm __3	4__1-1/4 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0150SEBCN	Hand Shut- Off	Angle	38 mm	1-1/2"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0150SEBHN	Hand Shut- Off	Angle	38 mm	1-1/2"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0150SSBCN	Hand Shut- Off	Angle	38 mm	1-1/2"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0150SSBHN	Hand Shut- Off	Angle	38 mm	1-1/2"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0150SSBHY	Hand Shut- Off	Angle	38 mm	1-1/2"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SAN0150WEBCN	Hand Shut- Off	Angle	38 mm	1-1/2"	Butt Weld- Weld Neck	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0150WEBHN	Hand Shut- Off	Angle	38 mm	1-1/2"	Butt Weld- Weld Neck	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0150WSBCN	Hand Shut- Off	Angle	38 mm	1-1/2"	Butt Weld- Weld Neck	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0150WSBHN	Hand Shut- Off	Angle	38 mm	1-1/2"	Butt Weld- Weld Neck	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__38 mm __3	4__1-1/2 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0075SSBCN	Hand Shut- Off	Globe T	20 mmm	3/4"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0075SSBHN	Hand Shut- Off	Globe T	20 mmm	3/4"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0075SSBHY	Hand Shut- Off	Globe T	20 mmm	3/4"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SGT0075TEBCN	Hand Shut- Off	Globe T	20 mmm	3/4"	FPT	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__FPT __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0075TEBHN	Hand Shut- Off	Globe T	20 mmm	3/4"	FPT	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__FPT __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0075TSBCN	Hand Shut- Off	Globe T	20 mmm	3/4"	FPT	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__FPT __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0075TSBHN	Hand Shut- Off	Globe T	20 mmm	3/4"	FPT	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0075TSBHY	Hand Shut- Off	Globe T	20 mmm	3/4"	FPT	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Globe T __2	3__20 mmm __3	4__3/4 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SGT0100SEBCN	Hand Shut- Off	Globe T	25 mm	1"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0100SEBHN	Hand Shut- Off	Globe T	25 mm	1"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0100SSBCN	Hand Shut- Off	Globe T	25 mm	1"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0100SSBHN	Hand Shut- Off	Globe T	25 mm	1"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0100SSBHY	Hand Shut- Off	Globe T	25 mm	1"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SAN0200SEBCN	Hand Shut- Off	Angle	50 mm	2"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0200SEBHN	Hand Shut- Off	Angle	50 mm	2"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0200SSBCN	Hand Shut- Off	Angle	50 mm	2"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0200SSBHN	Hand Shut- Off	Angle	50 mm	2"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0200SSBHY	Hand Shut- Off	Angle	50 mm	2"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SAN0200WEBCN	Hand Shut- Off	Angle	50 mm	2"	Butt Weld- Weld Neck	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0200WEBHN	Hand Shut- Off	Angle	50 mm	2"	Butt Weld- Weld Neck	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0200WSBCN	Hand Shut- Off	Angle	50 mm	2"	Butt Weld- Weld Neck	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0200WSBHN	Hand Shut- Off	Angle	50 mm	2"	Butt Weld- Weld Neck	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__50 mm __3	4__2 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0250SEBCN	Hand Shut- Off	Angle	65 mm	2-1/2"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0250SEBHN	Hand Shut- Off	Angle	65 mm	2-1/2"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0250SSBCN	Hand Shut- Off	Angle	65 mm	2-1/2"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0250SSBHN	Hand Shut- Off	Angle	65 mm	2-1/2"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0250WEBCN	Hand Shut- Off	Angle	65 mm	2-1/2"	Butt Weld- Weld Neck	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0250WEBHN	Hand Shut- Off	Angle	65 mm	2-1/2"	Butt Weld- Weld Neck	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0250WSBCN	Hand Shut- Off	Angle	65 mm	2-1/2"	Butt Weld- Weld Neck	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0250WSBHN	Hand Shut- Off	Angle	65 mm	2-1/2"	Butt Weld- Weld Neck	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__65 mm __3	4__2-1/2 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0300SEBCN	Hand Shut- Off	Angle	75 mm	3"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0300SEBHN	Hand Shut- Off	Angle	75 mm	3"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0300SSBCN	Hand Shut- Off	Angle	75 mm	3"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0300SSBHN	Hand Shut- Off	Angle	75 mm	3"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0300SSBHY	Hand Shut- Off	Angle	75 mm	3"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SAN0300WEBCN	Hand Shut- Off	Angle	75 mm	3"	Butt Weld- Weld Neck	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SAN0300WEBHN	Hand Shut- Off	Angle	75 mm	3"	Butt Weld- Weld Neck	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Butt Weld- Weld Neck __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SAN0300WSBCN	Hand Shut- Off	Angle	75 mm	3"	Butt Weld- Weld Neck	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Angle __2	3__75 mm __3	4__3 __4	5__Butt Weld- Weld Neck __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0100TEBHN	Hand Shut- Off	Globe T	25 mm	1"	FPT	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0100TSBCN	Hand Shut- Off	Globe T	25 mm	1"	FPT	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0100TSBHN	Hand Shut- Off	Globe T	25 mm	1"	FPT	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__25 mm __3	4__1 __4	5__FPT __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0125SEBCN	Hand Shut- Off	Globe T	32 mm	1-1/4"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0125SEBHN	Hand Shut- Off	Globe T	32 mm	1-1/4"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0125SSBCN	Hand Shut- Off	Globe T	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0125SSBHN	Hand Shut- Off	Globe T	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0125SSBHY	Hand Shut- Off	Globe T	32 mm	1-1/4"	Socket Weld	Standard Bonnet	Hand Wheel	Plated	1__Hand Shut- Off __1	2__Globe T __2	3__32 mm __3	4__1-1/4 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__Plated __8
SGT0150SEBCN	Hand Shut- Off	Globe T	38 mm	1-1/2"	Socket Weld	Extended Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0150SEBHN	Hand Shut- Off	Globe T	38 mm	1-1/2"	Socket Weld	Extended Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Extended Bonnet __6	7__Hand Wheel __7	8__No Plating __8
SGT0150SSBCN	Hand Shut- Off	Globe T	38 mm	1-1/2"	Socket Weld	Standard Bonnet	Seal Cap	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Seal Cap __7	8__No Plating __8
SGT0150SSBHN	Hand Shut- Off	Globe T	38 mm	1-1/2"	Socket Weld	Standard Bonnet	Hand Wheel	No Plating	1__Hand Shut- Off __1	2__Globe T __2	3__38 mm __3	4__1-1/2 __4	5__Socket Weld __5	6__Standard Bonnet __6	7__Hand Wheel __7	8__No Plating __8

Mostrar registros

Anterior1 2 3 4Siguiente

RS- Hand Shut- Off/ Expansion Valves | Product Series

Estilo de la válvula

Estilo del cuerpo

Tamaño del puerto (mm)

Tamaño del puerto (pulg)

Estilo de la conexión

Sombrero

Mango

Recubrimiento

Consiga su cuenta de Parker hoy mismo!

RS- Hand Shut- Off/ Expansion Valves

Especificaciones técnicas

Descripción completa del producto

Documentos relacionados