Hyperfilter BioEnergy Natural Gas Filter | #FFB1110-304


LOADING IMAGES
FFB1110-304

Hyperfilter BioEnergy Natural Gas Filter | #FFB1110-304

High efficiency stainless steel filters for the treatment of biogas from anaerobic digesters and landfills for flow rates of up to 1110m³/h and a maximum operating pressure of 0.5 barg.


Especificaciones técnicas

  • Materiales de fabricación: Housing: Galvanized steel AISI304; Seals: Neopren
  • Entrada de conexión del puerto: DN200
  • Índice de caudal máximo (m³/h): 1110
  • Tamaño del puerto de salida: DN300
  • Presión de trabajo máxima: 0.5 barg, 7.25 psig
  • Peso: 108 kg, 238.1 lb
  • Anchura: 633 mm, 24.92 inch
  • Altura: 1883 mm, 74.13 inch
  • Tipo de conexión: Flanged DIN EN 1092-1
  • Índice de caudal máximo: 653.33 CFM
  • Valor de filtración (micras): 20 μm
  • Temperatura máxima de funcionamiento: 100 °C, 212 °F
  • Temperatura mínima de funcionamiento: -10 °C, 14 °F
  • Elemento compatible: EL-FFB720-110
  • Marca: Parker Hiross
  • Cumplimiento con especificaciones: not necessary due to low pressure
  • Aplicación: Filtration of biogas
  • Número de elementos: 1

Información del artículo

Biogas produced in anaerobic digesters and landfills is saturated with water and contains foams, small solid particles in suspension, greases, particulates and other contaminants: it is therefore essential that these contaminants are removed from the gas by filtration prior to any downstream equipment or pipework.

Failure to remove these impurities may lead to a malfunction of devices and processes downstream and, in the absence of effective dehumidification, can cause clogging or blocking of blowers, heat exchangers and gas meters increasing maintenance costs and plant down time.

Hyperfilter BioEnergy filters have been specifically designed to prevent these undesired effects, available in a range of sizes matched to the needs of biogas applications. The secret of Hyperfilter BioEnergy is its highly advanced filter element. This combines ultra-high particle retention efficiency with extremely low pressure drop which results in clean, ready to use biogas with service costs kept to a minimum.

Features
• High efficiency filtration media

• Stainless steel housing materials (AISI304 or AISI316L) with pickling and passivation treatment

• Range of sizes to cover biogas flow rates from 105 to 110 m³/h (larger sizes available on request)

• Supplied complete with support legs for easy installation and mounting

• Top access cover to enable quick and easy element replacement

Benefits
• Maximum protection for downstream equipment and pipework significantly reducing maintenance costs and plant downtime

• Highly reliable and continuous operation even in the harshest conditions typically experienced in a biogas plant or landfill

• Very low pressure drop

Sizing and Selection
Important Note: For quoted gas purity performance, gas filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Leer más Mostrar menos

Diseños en CAD + Archivos

No hay archivo CAD disponible

OK

x

Documentos relacionados

×

Cantidad
Solicitar un presupuesto

El artículo se ha añadido correctamente a la cesta de presupuesto IR A MIS COTIZACIONES

x

OK

x

Encontrar un distribuidor

Puntos de venta

Contacto local

Latin American Group Headquarters

Parker Hannifin Ind. e Com. Ltda.

Estrada Municipal Joel de Paula, 900

São José dos Campos

SP

Brasil

12247-015

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.

687852
A22066