The charging set VG3 is an indispensable instrument for the verification, pressurization and nitrogen bleeding of
the hydraulic accumulators. The standard set is delivered in a storage case containing the following:
• pressure gauge with standardized graduations in bar
• vent valve
• 3 connection adapters for charging valves. (7/8’’ – 5/8’’ - 8V1).
• High pressure hose, 2.5 m length, in standard, maximum working pressure 400 Bar. This hose is fitted at
each end with a female swivel coupling G ¼’’BSP for connecting to the inflation port. It can be connected
to a commercial nitrogen bottles, in this case add an adapter on one end view model in the country. For the
other destinations consult Parker Olaer.
• Operating instruction french/english version
Note: On request, the following options are available :
• Pressure gauge with different scale divisions : 63 mm with glycerol bath back end G1/4’’ BSP equipped with direct gear for minimess ®
connection. To scale divisions 0-10,0-25,0-100,0-400, with accuracy class 1.6%.
• High pressure hose of different length with adapters for nitrogen bottles from various countries are available (specify country)
Maximum working pressure: limited by the maximum operating pressure of the installed hydraulic system, pressure limited to 400 bar in
any case.