THERM-A-GAP PAD 60 Thermally Conductive Gap Filler Pads | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Grosor del material

Tipo de transportador

Forma

Tamaño

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
THERM-A-GAP PAD 60 Thermally Conductive Gap Filler Pads THERM-A-GAP PAD 60 Thermally Conductive Gap Filler Pads THERM-A-GAP PAD 60 Thermally Conductive Gap Filler Pads

THERM-A-GAP PAD 60 Thermally Conductive Gap Filler Pads

Puntos de venta

Parker Chomerics THERM-A-GAP™ PAD 60 Thermally Conductive Gap Filler Pads provide a low hardness (40 Shore 00) solution with 6.0 W/m-K of thermal conductivity.

Especificaciones técnicas

  • Color: Green
  • Gravedad específica: 3.3
  • Durómetro: 40 (Shore 00), Softest
  • Deflexión a presión: 38% @ 50 psi (345 kPa)
  • Impedancia térmica: 0.24 °C-cm2/W
  • Capacidad de calefacción: 1 J/g-K
  • Coeficiente de expansión térmica: 150 ppm/K
  • Resistencia dieléctrica: 127 VAC/mil (5.0 kVAC/mm)
  • Resistividad volumétrica: 10^13 ohm-cm
  • Temperatura de funcionamiento: -67 to 392 °F (-55 to 200 °C)
  • Constante dieléctrica: 9.3 @ 1,000 kHz
  • Factor de disipación: 0.006 @ 1,000 kHz
  • Pérdida de masa total de desgasificación: 0.05% (0.01% CVCM)
  • Vida útil en depósito: 18 Months
  • Clasificación de inflamabilidad: UL 94 V-0
  • Cumplimiento con especificaciones: RoHS
  • Tipo de productos: Thermal Gap Pad
  • Conductividad térmica: 6 W/m-K
  • Temperatura de almacenamiento: 50 to 90°F (10 to 32°C) @ 50% RH

Descripción completa del producto

Parker Chomerics THERM-A-GAP™ PAD 60 Thermally Conductive Gap Filler Pad is a soft, high performance thermal gap filler pad with 6.0 W/m-K and a Shore 00 hardness of 31. THERM-A-GAP PAD 60 offers the enticing combination of both excellent thermal conductivity and very low deflection, along with very low outgassing, to provide an effective thermal interface between heat sinks and electronic devices where there are uneven surfaces, air gaps and rough surface textures may exist.

THERM-A-GAP PAD 60 is available in various thicknesses and finished in standard sheets of 10" x 15" . Custom size configurations and die cut parts are available as individual parts, or on sheets.

To receive a quote on a custom size part, choose your thickness and carrier options, and then select “custom” size.
Be sure to write in the comments section, upon check out of your quote request, which custom size dimensions you need. Our team will then reach out for your specific drawing to complete your quote request.

Available Carriers:
• A – aluminum foil (with PSA) - this carrier’s primary function is to allow a pressure sensitive adhesive on the gap pad.
• No carrier (no letter distinction) - no carrier or “un-reinforced” option allows the gap pad to have high tack surfaces on both sides, allowing for the pad to be highly conformable, but it does make cutting and handling of the product more difficult.

Features and Benefits:
• 6.0 W/m-K Thermal Conductivity
• Thermal putty-like modulus
•Ultra-low deflection force requirements
• High thermal conductivity
• High tack surface reduces contact resistance
• UL 94 V-0 flammability rated
• RoHS compliant

Typical Applications:
• Telecommunications equipment
• Consumer electronics
• Automotive electronics (ECUs)
• LEDs & lighting
• Power conversion
• Desktop computers, laptops, servers
• Handheld devices
• Memory modules
• Vibration dampening

Documentos relacionados

Literature and Reference Materials
Blog Post: Design Guidelines for Grounding, Shielding and Thermal Management in Wi-Fi 6E and Wi-Fi 7 Gateways
Blog Post: This Is the Next Generation High Performing Thermal Gap Filler Pad
Case Study: High Performance Thermal Gap Pad for Smart Home Device
Datasheet: THERM-A-GAP PAD 60
Parker Chomerics North America Terms and Conditions of Sale
Product Catalog: Thermal Interface Materials
Shelf Life and Material Re-Certification for Thermal Interface Materials
White Paper: Choosing Between Thermal Gels and Thermal Gap Filler Pads
Contact & Support Information
Request a Chomerics Product Sample
Find Your Local Parker Chomerics Sales Rep or Distributor
Request a Quote
Compliance, Certifications & Safety
Parker Chomerics Safety Data Sheets (SDS)
Product Compliance: China RoHS Compliant
Product Compliance: EU PFOS Compliant
Product Compliance: EU RoHS Compliant
Product Compliance: REACH SVHC Meets Requirements
Test Report: THERM-A-GAP PAD 60 Reliability Report
Product Demos & Tutorials
Parker Chomerics Product Case Studies
Selector Guides
Healthcare and Life Sciences Solutions - Medical Devices Manufacturing Products
×
Ver catálogos
compartir / correo electrónico
Imprimir
Productos Grosor del material Tipo de transportador Forma Tamaño
61-04-1015-PAD60 0.04 in (1.01 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-04-CUSTOM-PAD60 0.04 in (1.01 mm) No Carrier (Unsupported) Custom Custom
61-05-1015-PAD60 0.05 in (1.27 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-05-CUSTOM-PAD60 0.05 in (1.27 mm) No Carrier (Unsupported) Custom Custom
61-06-1015-PAD60 0.06 in (1.52 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-06-CUSTOM-PAD60 0.06 in (1.52 mm) No Carrier (Unsupported) Custom Custom
61-07-1015-PAD60 0.07 in (1.78 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-07-CUSTOM-PAD60 0.07 in (1.78 mm) No Carrier (Unsupported) Custom Custom
61-08-1015-PAD60 0.08 in (2.03 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-08-CUSTOM-PAD60 0.08 in (2.03 mm) No Carrier (Unsupported) Custom Custom
61-09-1015-PAD60 0.09 in (2.29 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-09-CUSTOM-PAD60 0.09 in (2.29 mm) No Carrier (Unsupported) Custom Custom
61-10-1015-PAD60 0.10 in (2.54 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-10-CUSTOM-PAD60 0.10 in (2.54 mm) No Carrier (Unsupported) Custom Custom
61-11-1015-PAD60 0.11 in (2.79 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-11-CUSTOM-PAD60 0.11 in (2.79 mm) No Carrier (Unsupported) Custom Custom
61-12-1015-PAD60 0.12 in (3.05 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-12-CUSTOM-PAD60 0.12 in (3.05 mm) No Carrier (Unsupported) Custom Custom
61-13-1015-PAD60 0.13 in (3.30 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-13-CUSTOM-PAD60 0.13 in (3.30 mm) No Carrier (Unsupported) Custom Custom
61-14-1015-PAD60 0.14 in (3.56 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-14-CUSTOM-PAD60 0.14 in (3.56 mm) No Carrier (Unsupported) Custom Custom
61-15-1015-PAD60 0.15 in (3.81 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-15-CUSTOM-PAD60 0.15 in (3.81 mm) No Carrier (Unsupported) Custom Custom
61-16-1015-PAD60 0.16 in (4.06 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-16-CUSTOM-PAD60 0.16 in (4.06 mm) No Carrier (Unsupported) Custom Custom
61-17-1015-PAD60 0.17 in (4.32 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-17-CUSTOM-PAD60 0.17 in (4.32 mm) No Carrier (Unsupported) Custom Custom
61-18-1015-PAD60 0.18 in (4.57 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-18-CUSTOM-PAD60 0.18 in (4.57 mm) No Carrier (Unsupported) Custom Custom
61-19-1015-PAD60 0.19 in (4.83 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-19-CUSTOM-PAD60 0.19 in (4.83 mm) No Carrier (Unsupported) Custom Custom
61-20-1015-PAD60 0.20 in (5.08 mm) No Carrier (Unsupported) Flat sheets 10 in x 15 in (254 mm x 381 mm)
61-20-CUSTOM-PAD60 0.20 in (5.08 mm) No Carrier (Unsupported) Custom Custom
62-04-1015-PAD60A 0.04 in (1.01 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-04-CUSTOM-PAD60A 0.04 in (1.01 mm) A - Aluminum Foil with PSA Custom Custom
62-05-1015-PAD60A 0.05 in (1.27 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-05-CUSTOM-PAD60A 0.05 in (1.27 mm) A - Aluminum Foil with PSA Custom Custom
62-06-1015-PAD60A 0.06 in (1.52 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-06-CUSTOM-PAD60A 0.06 in (1.52 mm) A - Aluminum Foil with PSA Custom Custom
62-07-1015-PAD60A 0.07 in (1.78 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-07-CUSTOM-PAD60A 0.07 in (1.78 mm) A - Aluminum Foil with PSA Custom Custom
62-08-1015-PAD60A 0.08 in (2.03 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-08-CUSTOM-PAD60A 0.08 in (2.03 mm) A - Aluminum Foil with PSA Custom Custom
62-09-1015-PAD60A 0.09 in (2.29 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-09-CUSTOM-PAD60A 0.09 in (2.29 mm) A - Aluminum Foil with PSA Custom Custom
62-10-1015-PAD60A 0.10 in (2.54 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-10-CUSTOM-PAD60A 0.10 in (2.54 mm) A - Aluminum Foil with PSA Custom Custom
62-11-1015-PAD60A 0.11 in (2.79 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-11-CUSTOM-PAD60A 0.11 in (2.79 mm) A - Aluminum Foil with PSA Custom Custom
62-12-1015-PAD60A 0.12 in (3.05 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-12-CUSTOM-PAD60A 0.12 in (3.05 mm) A - Aluminum Foil with PSA Custom Custom
62-13-1015-PAD60A 0.13 in (3.30 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-13-CUSTOM-PAD60A 0.13 in (3.30 mm) A - Aluminum Foil with PSA Custom Custom
62-14-1015-PAD60A 0.14 in (3.56 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-14-CUSTOM-PAD60A 0.14 in (3.56 mm) A - Aluminum Foil with PSA Custom Custom
62-15-1015-PAD60A 0.15 in (3.81 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-15-CUSTOM-PAD60A 0.15 in (3.81 mm) A - Aluminum Foil with PSA Custom Custom
62-16-1015-PAD60A 0.16 in (4.06 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-16-CUSTOM-PAD60A 0.16 in (4.06 mm) A - Aluminum Foil with PSA Custom Custom
62-17-1015-PAD60A 0.17 in (4.32 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-17-CUSTOM-PAD60A 0.17 in (4.32 mm) A - Aluminum Foil with PSA Custom Custom
62-18-1015-PAD60A 0.18 in (4.57 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-18-CUSTOM-PAD60A 0.18 in (4.57 mm) A - Aluminum Foil with PSA Custom Custom
62-19-1015-PAD60A 0.19 in (4.83 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-19-CUSTOM-PAD60A 0.19 in (4.83 mm) A - Aluminum Foil with PSA Custom Custom
62-20-1015-PAD60A 0.20 in (5.08 mm) A - Aluminum Foil with PSA Flat sheets 10 in x 15 in (254 mm x 381 mm)
62-20-CUSTOM-PAD60A 0.20 in (5.08 mm) A - Aluminum Foil with PSA Custom Custom
Close [ x ]
Full Screen
687852
179336