Split pillow block rotary shaft seal with spring loaded elastomer lip (RPDT) | Brazil

Split pillow block rotary shaft seal with spring loaded elastomer lip (RPDT) | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Diámetro del eje (pulg)

Diámetro interior (pulg)

Anchura (pulg)

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.

Split pillow block rotary shaft seal with spring loaded elastomer lip (RPDT)

Split pillow block rotary shaft seal with spring loaded elastomer lip (RPDT)

Homogenous rubber spring-loaded single lip seal with tapered heel provides lubrication retention in pillow block bearings. Available in easy-to-install split configuration.

Especificaciones técnicas

  • Perfil: RPDT, homogenous NBR, split
  • Opciones de material de polímero: Nitrile Butadiene Rubber (NBR, XNBR)
  • Temperatura mínima de funcionamiento: -20 °F, -28 °C
  • Temperatura máxima de funcionamiento: 250 °F, 121 °C
  • Velocidad de corte máxima: 1000 to 2000 (5.1 to 10.2 m/s) ft/min, 5.1 to 10.2 m/sec
  • Desviación del eje máxima: 0.010"
  • Desalineación máxima del eje con el diámetro: 0.010"
  • Presión de trabajo máxima: 0 psi
  • Tipo de aplicación térmica: Standard Temperature (-30 to 250°F)
  • Tipo de junta: Composite rubber/aramid fiber heel
  • Material de junta del eje: Rubber

Descripción completa del producto

Parker’s RPDT profile is a homogenous rubber seal which features a single spring-loaded lip and tapered heel. The RPDT is available in easy-to-install split configuration only.

A stainless steel garter spring provides constant, uniform load of the lip on the shaft for the life of the seal. The spring keeps the elastomer lip in contact with the shaft during higher shaft speeds and also helps offset normally occurring compression set and wear of the lip material.

Standard Material: NBR: Temp -20F / +250F

Shaft Surface Speed: Up to 2000 fpm (10.2 m/s)

Maximum Pressure: 0 psi (0 bar)

Size Range: 3.375 to 16.000 inches (85.73 to 406 mm)

Maximum Shaft Dynamic Runout (TIR): 0.010” (0.254 mm)

Maximum (STBM) Misalignment: 0.010” (0.254 mm)

Typical Applications: Pillow blocks.

Documentos relacionados

×

687852
687567