The Next Generation - Full cycling mode results in dryer air than conventional dryers
The Smart Cycle Plus configuration combines the advantages of superior performance and energy savings with the oil removal efficiency of a built-in, multi-stage separator/cold coalescer. By locating the coalescing filter at the coldest point in the air system, filtration efficiency is greatly enhanced, and because of a pre-separation of bulk contaminants prior to entering the element(s), pressure drop and operating costs are dramatically reduced.
Features:
• Best in class dewpoint performance
• Tri Mode Operation allows dryer to operate in cycling, non-cycling or auto mode.
• Unlimited cycling due to unloaded “soft start”
• Multi-stage separation and filtration
• Level actuated drain
• Diagnostic readouts indicate need for service
• Drain light
• Alarm light
• Displays in English or Metric
• Serial Port with MODBUS
• Digital readout air in temperature
• Digital readout ambient or water in temperature
• High inlet temperature warning
• High ambient or water in temperature warning
• Optional Control Center
Benefits:
• Lower dewpoint temperature achieved with Smart Cycle Plus results in cleaner operation
• Longer lasting components
• Upstream malfunction that results in more severe inlet conditions can be readily handled without resulting in downstream problems
• Lower operating costs, with no sacrifice in performance
• Dryer runs only as needed
• Environmentally friendly refrigerant
• Tube and shell heat exchanger with grooved tube sheets provide greatest mechanical strength and lowest pressure drop
• Patented flood level control protects refrigeration circuit
