Piston guide ring Prädifa series FV | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Diámetro exterior (mm)

Diámetro interior (mm)

Altura del elemento (mm)

Ancho de la ranura

Diámetro del pistón (mm)

Temperatura mínima de servicio (°C)

Temperatura máxima de servicio (°C)

Material - Juntas

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
Piston guide ring Prädifa series FV Piston guide ring Prädifa series FV

Piston guide ring Prädifa series FV

Puntos de venta

Piston guide ring for oil-lubricated applications, such as hydraulics cylinders. Extremely wear-resistant. Superior compression strength: 340 N/mm2. ISO 10766. Special design to avoid edge pressure.

Especificaciones técnicas

  • Medio: Hydraulic
  • Opciones de material de polímero: Phenolic Resin Fabric
  • Carga específica permitida: 270 N/mm2
  • Temperatura mínima de funcionamiento: -50 °C
  • Temperatura máxima de funcionamiento: 120 °C
  • Velocidad de corte máxima: 0.5 m/sec
  • Unidad de medida: Length: mm
  • Tipo de aplicación térmica: Standard Moderate Temperature (-35 to 100°C)
  • Característica de capacidad de carga optimizada: Yes

Descripción completa del producto

The FV rod guide ring made of fabric phenolic resin laminate is intended for use in hydraulic cylinders. The guide ring is created in a slit form (45 ° cut) to enable installation. In addition, the slit version ensures that the system pressure can pass toward the seal, taking thermal expansions into account. The special geometry of the dynamic sliding surface avoids edge compression, resulting in more favorable load distribution.

The FV guide ring is exceptionally pressure-resistant and wear-resistant.
Pressure resistance is much higher than that of guiding elements made of other plastics.

After installation, the FV guide ring has an interference fit against the bottom of the groove.

• Minimal play due to extremely small manufacturing tolerances of the guiding elements.
• Vibration absorption effect.
• Extreme wear resistance.
• Improved sliding properties due to surface structure.
• Significantly higher permissible loading pressure compared with other guidance tape materials.
• Dimensions according to ISO 10766.
• Any desired nominal diameter available due to use of machining technique.
• Installation in closed and undercut housings.

Range of application:
Guiding element for rods in hydraulic cylinders.

Documentos relacionados

Literature and Reference Materials
Storage and Cleaning of Elastomer Seals--PTD3032
Product Demos & Tutorials
Mixing the right ingredients: Material Development at Parker-Prädifa
Parker Final Exam in Physics / Sealing Systems Put to the Test
×
Ver catálogos
compartir / correo electrónico
Imprimir
Productos Diámetro exterior (mm) Diámetro interior (mm) Altura del elemento (mm) Ancho de la ranura Diámetro del pistón (mm) Temperatura mínima de servicio (°C) Temperatura máxima de servicio (°C) Material - Juntas
FVA095Q5029 100 95 9.7 9.7 99.4 -50 120 Q5029
FV6358Q5029 63 58 9.7 9.7 62.5 -50 120 Q5029
FV8076Q5029 80 75 9.7 9.7 79.5 -50 120 Q5029
Close [ x ]
Full Screen
687852
687424