KE-MT Series Large Flow Heatless Compressed Air Dryer

Puntos de venta

Large flow heatless compressed air dryers with available flow rates up to 6100m³/h @ 7 barg and pressure dew points of -25°C to -70°C, for industrial compressed air treatment applications.

Especificaciones técnicas

Índice de caudal máximo: 706 to 3590 CFM at 101 psig, PDP -13°F
Presión de trabajo máxima: 10 barg, 145 psig
Temperatura ambiente máxima: 50 °C
Temperatura ambiente mínima: 1.5 °C
Grado de protección de admisión: IP65
Temperatura máxima de funcionamiento: 50 °C, 122 °F
Temperatura mínima de funcionamiento: 25 °C, 77 °F
Tamaño del puerto: DN50 to DN125
Tipo de conexión: Flanged according to EN1092-1
Peso: 640 to 2850 kg
Anchura: 1060 to 2160 mm
Profundidad: 840 to 1565 mm
Altura: 2080 to 2820 mm
Requisitos eléctricos: 230V, 50-60Hz
Tipo de controlador: Multitronic
Presión mínima de trabajo: 5 barg, 72.52 psig
Consumo de energía: 7.2 VA
Tipo de productos: Heatless
Punto de rocío a presión: -25 to -70 °C, -13 to -97 °F
Marca: Zander, Parker, Parker
Cumplimiento con especificaciones: PED 97/23/EG Module D+B Category II, others on request

Descripción completa del producto

Parker KE-MT Series heatless adsorption dryers are designed to supply high quality dry compressed air reliably and efficiently down to a pressure dew point of -70 °C. They are capable of volume flows of up to 6100m³/h at operating conditions of 7 barg (100psig).

The KE-MT Series is offered with energy saving dew point dependent switching (DDS) as an option. Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available. In such an operating mode, the changeover cycle between vessels only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated vessel occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides significant energy savings.

When there is a further requirement for compressed air to be delivered free from oil vapour and odours, as well as clean and dry, the units can be supplied with an additional third vessel filled with activated carbon, the KEA-MT Series. KEA-MT is ideal for use in laboratory, food, beverage and pharmaceutical applications.

Sizing and Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the product information sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Documentos relacionados

Literature and Reference Materials
Brochure - Parker GSFE 4 Year Extended Warranty - (English)
Parker Zander Service Catalogue - (English)
Product Catalogue - K(A)-MT 10-95 / KE-MT 120-600 Twin Tower Dryer Ranges - (English)
User Manual - KE-MT 120 - 600 398H271932-Rev05 - (English)
User Manual - KE-MT 120 - 600 398H271932-Rev06/07 - (English)
User Manual - KE-MT 120 - 600 398H271932_Rev05 - (German)
User Manual - KE-MT 120 - 600 398H271932_Rev05 - (Italian)
User Manual - KE-MT 120 - 600 398H271932_Rev06 /07- (German)
User Manual - KE-MT 120 - 600 398H271932_Rev06/07 - (Italian)

Training
Video - Compressed Air Contamination and its Sources - (English)
Video - Compressed Air Contamination in Detail - (English)
Video - The Right Dryer For Your Application

Product Demos & Tutorials
Video - Adsorption: What is Snowstorm Filling?
Video - K-MT/KE-MT Heatless Compressed Air Dryer System - Product Operation
Video - Parker GSFE 4 Year Extended Warranty - (English)