Compressed Natural Gas (CNG) Service Elements – Racor FFC Series | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Serie de alojamiento del filtro

Medio

Altura (pulg)

Altura (cm)

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
Compressed Natural Gas (CNG) Service Elements – Racor FFC Series

Compressed Natural Gas (CNG) Service Elements – Racor FFC Series

Racor FFC Series Replacement (Type C) Coalescer Elements for Compressed Natural Gas (CNG) Filtration

Especificaciones técnicas

  • Serie del producto: Cartridge CNG Fuel Filter, FFC Series
  • Marca: Racor
  • Para tipo de fluido: CNG
  • Aplicación: Onboard CNG powered vehicles
  • Diámetro: 0.8 or 1.5 depeending on product selected inch, 2 or 3.8 depending on product selected cm

Descripción completa del producto

FFC Series Replacement (Type C) Coalescer Elements for Compressed Natural Gas (CNG) Filtration

Note: Images are for reference only and may not represent actual product selected.

FFC series filters are designed to protect critical engine components in CNG powered vehicles. Racor CLS replacement elements are specifically designed to remove oil, water, and solid contamination from compressed natural gas. The patented coalescing filter removes 99.97% of all aerosols in the 0.3 to 0.6 micron range.

These CNG coalescer elements are produced by a patented process of arranging micro-glass fibers into a tubular form. During operation, Dirty, wet CNG is forced through the coalescing media from the inside of a cartridge through a tubular wall to the outside, where large droplets fall to the bottom of the housing. Clean CNG gas exits the housing through the outlet port. Oil and water removed from the gas stream accumulates until drained, while dirt particles are trapped and retained on surfaces of the fibers.

Type C Media Grades to Order:

Grade 6

Grade 6 filter elements are used when “total removal of liquid aerosols and suspended fines” is required. Because of its overall performance characteristics, this grade is most often recommended below 500 PSIG.

Grade 10

Grade 10 filters are used as pre-filters for grade 6 to remove gross amounts of aerosols or tenacious aerosols which are difficult to drain. This grade is often used as a ‘coarse’ coalescer.

Documentos relacionados

×
Productos Serie de alojamiento del filtro Medio Altura (pulg) Altura (cm)
CLS110-06 FFC-110 Coalescer grade 06 2.5 6.4
CLS110-10 FFC-110 Coalescer grade 10 2.5 6.4
CLS110L-06 FFC-110L Coalescer grade 06 5 12.7
CLS110L-10 FFC-110L Coalescer grade 10 5 12.7
CLS112-06 FFC-112 Coalescer grade 06 3 7.6
CLS112-10 FFC-112 Coalescer grade 10 3 7.6
CLS47113-01 FFC-113 Coalescer grade 06 5.9 15
CLS116-10 FFC-116N Coalescer grade 10 2.3 5.8

687852
687630