Marine Softwall Wet Exhaust Hose, Series SS269

Puntos de venta

Marine Softwall Wet Exhaust Hose is designed as a flexible connection for exhaust systems to circulate, cool and transfer hot engine water and exhaust gases in marine engine applications to 200°F and 200 psi, Series SS269

Especificaciones técnicas

Temperatura mínima de funcionamiento: -40 °C, -40 °F
Material de la cubierta: Nitrile
Presión de trabajo máxima: 150 to 200 psi, 1.0 to 1.7 MPa
Aplicación: Marine
Peso: 0.06 to 0.65 kg/m, 0.45 to 4.7 lb/ft, 0.45 to 4.65 lb, 0.20 to 2.11 kg
Diámetro interior de manguera nominal: 25 to 150 mm
Cumplimiento con especificaciones: ABYC, SAE J2006R1, USCG
Material del refuerzo de la manguera: 2 or 4 Plies of Textile
Diámetro interior: 1 to 6 inch, 25.4 to 152.4 mm
Tipo de paquete: Coil
Diámetro exterior: 1.440 to 6.898 inch, 36.6 to 175.2 mm
Radio de curvatura mínimo: n/a
Material del tubo interno de la manguera: Black, Nitrile
Color de la cubierta: Black
Estructura de la cubierta: Wrapped
Temperatura máxima de funcionamiento: 200 °F, 93 °C
Longitud por paquete: 25 to 50 ft

Descripción completa del producto

Parker's Series SS269 Marine Softwall Wet Exhaust Hose provides excellent service across a variety of onboard marine wet exhaust applications. The hose is flexible for easy routing/installation and resists oil and high temperatures common to engine compartments. Series SS269 absorbs more vibration than rigid pipe or tubing. The hose is available in multiple incremental sizes for connection to various sizes of pipe used in the marine industry, providing off-the-shelf convenience.

Markets:
• Marine

Features/Benefits:
• Tube: Black nitrile for oil and hot exhaust fumes compatibility to 200°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black nitrile heat and oil resistance.

Applications:
-media
• Hot exhaust fumes
• Oil
• Water
• Wet exhaust
-usage
• Cooling systems
• Heat exchangers
• Wet exhaust systems

Industry Standards:
• ABYC
• SAE J2006 R1
• USCG

Safety/Technical:
• Design Factor: 4:1
• Do not use with refined fuel, or in hardwall/suction applications.

Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.