8 Inch Reverse Osmosis Membrane Element | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Caudal de agua del producto (gpd)

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
8 Inch Reverse Osmosis Membrane Element

8 Inch Reverse Osmosis Membrane Element

Puntos de venta

Parker 8'' Reverse Osmosis Membrane Element for Sea Water and Brackish Water offers high salt rejection, high production rates, and is energy efficient. This membrane is designed to fit an industry standard 8" pressure vessel.

Especificaciones técnicas

  • Marca: Village Marine
  • Aplicación: Leisure Marine and Commercial
  • Tipo de productos: Membrane
  • Módulo de membrana incluido: Thin-film composite
  • Presión de trabajo máxima: 1200 psi
  • Temperatura máxima de funcionamiento: 113 °F / 45 °C °F, 45.0 °C
  • Turbiedad de alimentación máxima: 1 NTU
  • Tolerancia al cloro: <0.1 PPM
  • Rango de pH: Continuous Operation: 2-11, Continuous Operation: 1-13
  • Maximum Feed Flow Rate: 75 gal/min
  • Índice de densidad de sedimentos de alimentación máximo: SDI 5
  • Tipo de recubrimiento exterior de la membrana: Fiberglass
  • Condiciones de prueba del elemento: ~32, 000 PPM NACL; 800 PSI; 77°F (25°C), ~2, 000 PPM NACL; 225 PSI; 77°F (25°C)
  • Rechazo de sal: 99.4-99.6 (minimum), 99.7-99.75 (typical) %, 99.7 to 99.75 % (typical)
  • Anchura: 40"/101.6 cm inch, 101.6 cm
  • Longitud: 8"/20.3 cm inch, 20.3 cm

Descripción completa del producto

Village Marine thin film composite Reverse Osmosis membranes deliver high salt rejection while maintaining high production rates to obtain the energy efficiency demanded by plant operators.

By selecting the highest grade of materials and thoroughly testing performance, Village Marine Tec. is able to offer the highest quality products. Village Marine membranes are designed for use in Parker Village Marine Tec. pressure vessel housings as well as other brand housings.

Operating Information:
• Keep elements moist at all times
• Permeate obtained from first two hours of operation should be discarded
•To prevent biological growth during storage, shipping, or system shutdowns it is recommended that elements be immersed in a protective solution
• The standard storage solution for long or short term storage should contain 1.0 percent (by weight) sodium metabisulfite (food grade)
• Flow rates for individual elements may vary +/-20%
• Element to fit industry standard 8.0 inch I.D. pressure vessel

Documentos relacionados

Literature and Reference Materials
Parker Village Marine AquaPro Reverse Osmosis Membranes Bulletin
Selector Guides
Product Selection Guide - Water Maker Systems Equipment for Leisure and Commercial Marine
×
Ver catálogos
compartir / correo electrónico
Imprimir
Productos Caudal de agua del producto (gpd)
27240331PK 9000
33-0851 11,000
45012007 7000
Close [ x ]
Full Screen
687852
679945